F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller
F4 1S 12A AIO Brushless Flight Controller

F4 1S 12A AIO Brushless Flight Controller

Regular price $44.99 USD Save $-44.99 USD
-126 in stock

What is the update of the ELRS 2.4G V2.0 board?

  • Support both 1S and 2S battery now. Only 1S supported on V1.0.
  • Use SPI ExpressLRS 2.4 receiver with Betaflight firmware.
  • Modify the shape of the board to support 85mm whoop frame. Only toothpick frame supported on V1.0.
  • Use the lighter and smaller SH connector instead of USB Type-C.

F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice.

Tons of ExpressLRS items are available now!

Bullet Point

  • F4 1S 12A AIO Flight Controller is the best choice for building ultra-lightweight 3" toothpick drones like HX115 SE FPV Quad.
  • Most of the 1S flight controllers on the market come with 5A ESC by now, but this FC especially integrates 1S 12A ESC, it can provide more sufficient power for 3" toothpick drones.
  • Built-in current meter, 2 programmable RGB LEDs, and SPI Frsky receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc.
  • Whoop mounting hole pattern, be compatible with most 1S 3" frames. Large pads are reserved for solder motor cables, this design will make solder easier.

Specification of FC

  • Item: F4 1S 12A AIO FC (Frsky)
  • Weight: 4.74 g (without power cable and BT2.0 connector)
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Intergrated SPI Frsky Receiver / Futaba Receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting Hole Size: 26mm x 26mm (suitable for whoop pattern mounting hole)
  • USB Port: Type-C

Specification of 1S 12A ESC

  • Built-in ESC with 12A continuous and peak 25A current
  • Input voltage: 1S Lipo
  • ESC firmware: Z_H_30_REV16_7.HEX
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM

This new BLHeli_S firmware (named Z_H_30_REV16_7.HEX) is supported by BLHeli Configurator, BLHeliSuite, and Bluejay Configurator for setup.

For download and flash, update to the newest BLHeliSuite-16714902a to support this ESC firmware online. For BLHeli Configurator or Bluejay Configurator, you need to load it local. The ESC firmware is available for download here.

Diagram for F4 1S 12A AIO FC

Below is the diagram for the SPI Frsky version board. UART1, UART2, and SBUS pads are left for external receivers like Frsky XM+, TBS Nano receiver so that a long receiver range is available.

Buzz pads (BUZZ+ and BUZZ-) are invalid directly. It needs some modification to make it works.

Below is the diagram for ELRS 2.4G V1.0 board.

Below is the diagram for ELRS 2.4G V2.0 board.

The current meter is integrated on the FC board. Here is the configuration in Betaflight Configurator.

12A 1S ESC

Should we really need a 12A ESC for 1S drones? If it is a 65mm or 75mm Whoop drone-like Meteor65, 5A ESC is enough for all actions. But how about with 3" propellers and 1102/1202.5 motors? Still, want smooth and powerful flying actions? The 5A ESC has developed about 3 years ago and was designed for whoop drones with 0603/0802 motors. For the past year, the BETAFPV team has been cooperating with BLHeli author Steffen on the 12A 1S ESC for 3" toothpick drones. Finally, it is here!

It marks "1-2S" on the board, could this FC board support 2S?

The V1.0 board is NOT support 2S battery. Please choose the V2.0 board for both 1S and 2S battery supported.

ELRS 2.4G RX

This board integrates the receiver with the most popular radio link ExpressLRS in 2021. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. Know more about the ExpressLRS project on Github or join the discussion in the Facebook Group.

This board is designed for long-range 3inch ultralight toothpick drones or 2S whoop drones. If you want to try ExpressLRS on 65mm/75mm whoop drones, please stay tuned on our F4 1S FC board with a built-in SPI ExpressLRS receiver.

How to Bind with Betaflight FC with ExpressLRS Receiver.

How to update the ELRS RX on the AIO board. (For ELRS 2.4G V1.0 version, ELRS receiver communicates with FC F411 via CRSF protocol. )

CLI command for the FC board.

Betaflight Firmware and CLI (SPI ELRS 2.4G)

This paragraph is only for ELRS 2.4G V2.0 board, with SPI ELRS 2.4G receiver integrated.

Since Betaflight has not yet released the official firmware that could supports the SPI ExpressLRS protocol, the current version is the Beta version. Please use the firmware and the CLI dump file below to recovery the FC board if needed. Betaflight will update to their official target soon. Please feel free to contact with us if you have any issues with this Beta version Firmware.

It is normal that there is no any option on Betaflight Configurator Receiver. As show below, the checkbox is blank.

Please change the “PID loop frequency” to “4KHZ” , sometimes it would make the SPI receiver not working correct while the value is “8KHZ”.

Download the firmware and CLI dump file for the F4 1S 12A FC (ELRS 2.4G) board.

How to Bind with Betaflight FC with SPI ExpressLRS Receiver.

More details and discussion on Github about SPI ELRS receiver.

SPI Frsky RX

Come with the build-in SPI Frsky Receiver (CC2500 chip), F4 1S 12A AIO FC can be compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default protocol is configured to Frsky D16 FCC out of the factory. Pilots could set up the protocol according to your own need in Betaflight Configurator.

Configuration

Protocol

FRSKY_D

Frsky D8

FRSKY_X

Frsky D16 FCC (ACCST 1.X version)

FRSKY_X_LBT

Frsky D16 LBT (ACCST 1.X version)

SFHSS

Futaba S-FHSS


How to Bind with Betaflight FC with SPI Frsky Receiver.

Recommend Parts

If you want to try the popular ExpressLRS receiver version for long-range performance, highly recommend you to check the items for the ExpressLRS series.

Package

  • 1 * F4 1S 12A AIO FC
  • 4 * Anti-vibration rubber dampers
  • 4 * M2 x 10mm screws
  • 4 * M2 x 10mm screws
  • 8 * M2 screw nut
  • 1 * BETAFPV dipole T antenna (2.4G/46mm, only for ELRS RX version board)
  • 8 * PH-1.25 connector for motor (not soldered, only for ELRS RX version board)

Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

In almost all cases, we will work with you to debug your issue firstly. 

Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

NOTE: The refund amount is limited to the purchase price of the item.

Directly Send Ticket: Create a new ticket

*We do not accept ALL kinds of returns.

*All sales are final.

Affected by Covid-19, there will be some delay in the delivery.

Shipping Methods and Charges

We are currently able to ship orders to most international addresses. But some countries are not available to ship batteries without purchasing of whoop drone (logistics company restrictions).
Two shipping methods are provided for you now. 
  • Standard Shipping
  • Expedited Shipping (including DHL / FedEx / UPS. Can not ship batteries)
For expedited shipping, you need to pay weight-based rates, which will be calculated automatically.
For standard shipping, then the shipping fee depends on the value of your orders. If your order is more than 20USD and less than 99.99USD, the shipping fee is 5USD. And the standard shipping fee is 10USD if your order is less than 20USD.
Free standard shipping is offered when your order is over USD$99.99.

Note:

- Some remote address will be charged remote shipping fees according to the quotation of the logistics company.
- Some special products with big volume are not applied to this free shipping rule. The product list as follows:

For the strict Customs Policy, countries below are not available for delivering batteries. Therefore, if you fail to purchase from our site, hope can you understand that. We'll open selling once there is a reliable logistics channel.
-India (Both drones and batteries)
-Kuwait

Shipping Time: 

All orders will be processed within 3-5 working days after your payment clearing.
If we are experiencing a high volume of orders or some products are out of stock, shipments may be delayed in a few days.
If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

Estimated Shipping Time:

  • Expedited Shipping: 3-7 working days
  • Standard Shipping (Registered Mail):  12-30 working days
Please note:
* These are estimated delivery times only, BETAFPV can not guarantee an exact delivery time.
* The estimated delivery time may be longer if any battery included in your order.
* Affected by Covid-19, there may be some delay in the delivery. 
* We accept no responsibilities and liabilities for delay in shipping time as this is beyond our control.
* Any problem about shipping info of your order, please contact Customer Support.

Battery Shpping Issues

- We can't ship the battery to the following countries by now: Indonesia / Middle / East / Indonesia/ Philippines/ Vietnam/ India/ Mexico/ UAE/ Brunei/ Finland/ Chile / Brazil / Oman and other remote areas. If your place a order but we don't have a logistic chanel to ship, we will send an email to inform you cancel the order. 
- For European customers, if your parcel includes only batteries, it will take a longer time for the parcel to arrive in your country. Click here to track your parcel. 
- If you only order batteries without a drone, then it can't be shipped by expedited Shipping (including DHL / FedEx / UPS) because of the strict restriction of shipping.
- If the number of batteries in your order exceeds the acceptable range of the logistics, we will ask you to cancel order or ship the batteries separately(extra shipping fee may be requried).

More Info requried

If  you are in Taiwan, South Korea or Brazil, there is some extra information that we need in your order because of your country's import policy. Please offer the fllowing information in your address, so we can ship your order in time.
  • Taiwan or Hongkong: please fill your address and name in Chinese.
  • South Korea: please provide your personal clearance code. If you do not have it, please apply it from this website:
    https://unipass.customs.go.kr/csp/index.do
  • Brazil: please provide your tax number (CPF) in your address.
  • Chile: please provide your individual tax number in your address.

How To Track My Parcel

We provide trackable shipping service to most of the package. Please click here to reach detail information.

Wrong Address

Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.

We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.

Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion. 

Damaged box or incorrect item(s)

If you receive damaged or incorrect item(s), contact Customer Support in 5 business days with receipt of your shipment to make the necessary corrections. 

 

All duties and taxes are the responsibility of the customer. 

 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)