The V3 version has all the function of V2 board, also add the following 2 additional function.
Add 8M Flash chip for Betaflight Black Box.
3 full UARTs (UART1, UART2 and UART6) are available in the V3 version. Pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for external receiver like TBS Crossfire.
The V2 board only have one full UART and could not support DJI digital FPV VTX.
For a new generation of toothpick drone，this new AIO Brushless FC can handle 20A continuous current(25A burst), which is the first 20A All-in-one FC on the market. Compared to FC / ESC Stacks design, this board provided with massive levels of performance capability while still maintain ultralight only 6.63g. Breaking through the limit of toothpick power, exploring more possibilities in 3''-4'' drones. This board is your best choice to DIY your own toothpick drone that is tailored to your requirements.
If you are looking for whoop version, please click here to reach out.
Here is a video of detailed introduction for 20A AIO FC, made by Jon E5 FPV.
This new board can handle 20A continuous current(25A burst), which is the first 20A All-in-one FC on the market
Comes with 4*Motor Pluggable Pins and Not Pre-solder in default, fits your needs of self-assembly best
HOW TO CONNECT THE EXTERNAL RX TO TOOTHPICK 20A AIO FC V2
Here is the connection diagram with Frsky XM+ receiver.
Here is the connection diagram with FS-RX2A receiver.
Here is the connection diagram with Futaba-X-BOSS AC900 receiver.
Here is the connection diagram with TBS Crossfire receiver.
There are 3 LEDs on the bottom of the board to indicate the status, including Receiver LED ( Green), FC Status LED ( Blue ) and FC Power LED ( Red ).
Mode LED (Green)
Horizon Mode/ Angle Mode
Mode LED (Green)
Power LED (Red)
Status LED (Blue)
Built-in CURRENT METER
You could get a more accurate current value without using the virtual current meter. In order to use this current sensor hardware, some configurations in Betaflight GUI are needed. In the "Power & Battery" tab:
Note: You may need to slightly adjust offset at Amperage Meter after connecting electronic components, such as VTX, camera, and motor.
Then when flying, you could find the real current value from the OSD information. Of course, the current sensor is configured well in the factory and you do not need to change it as usual.
Betafpv.com offers a (30) daymanufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.
For merchandise was confirmed as genuinely defective（Product Design problem & Quality issues）, we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.
In almost all cases, we will work with you to debug your issue firstly.
Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.
NOTE: The refund amount is limited to the purchase price of the item.
All orderswill be processedwithin 2 business days of your payment clearing. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders or some products out of stock, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email.
Shipping Methods and Charges
Betafpv.com is currently able to ship orders to most international addresses. All of the parcels are shipped by air. In addition, some countriesare not available to ship battery only without purchasing of whoop drone(Logistics company restrictions).
Two shipping methods are provided for you now.
Expedited Shipping (DHL)
If you choose expedited shipping, you need to pay weight-based rates, which will be calculated automatically. If you choose standard shipping, then the shipping fee depends on the value of your orders. If your order is less than 99.99USD, you have to pay 5 USD for the shipping fee. Free shipping is offered if your order is over 99.99USD.
Note: Some remote countries will be charged shipping fees according to the quotation of the logistics company.
Some special products are not applied to this rule.
The product list as follows:
LiteRadio 2 Radio Transmitter
VR01 FPV Goggles
Micro Whoop Drone Storage Case
Storage Case for 2-4S Micro Drone
Storage Case for 1S Micro Drone
BETAFPV Xmas Race Flag+LED Strip Light (1 PCS)
BETAFPV Xmas Arch Gate+LED Strip Light (1 PCS)
With those big volume products in your package, while your package is more than 99USD, we are sorry that we still need to charge you some shipping fee.
Countries & Area That Can't Be Shipped Battery Without Purchasing of Whoop Drone
We can't ship the battery to the following countries: Indonesia, Middle East, Indonesia, Philippines, Vietnam, India, Mexico, UAE, Brunei, Finland, Brazil, Oman and other remote areas for now.
If your place doesn't have a Chanel to ship, We will send an email to inform you. Sorry for the inconvenience.
For European customers, if your parcel includes only batteries, it will take a longer time for the parcel to arrive in your country. Click hereto track your parcel.
We are terribly sorry that wecan’t ship batteries and BNF by DHL because of the strict restriction of shipping.
but you can choose DHL express services to deliver other products except for drones and battery, such as parts of drones, Radio Transmitters and so on.
How To Track My Parcel
We provide trackable shipping service to most of the package. Please click here to reach detail information.
Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.
We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.
Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion.
Damaged Box or Incorrect Item(s)
If you receive damaged or incorrect item(s), contact Customer Support no later than 5 business days of receipt of your shipment to make the necessary corrections.
* All duties and taxes are the responsibility of the customer.
* Betafpv.com accepts no responsibilities and liabilities for delay in shipping time as this is beyond our control.