F3 Brushed Flight Controller (Frsky Rx + OSD V2)
F3 Brushed Flight Controller (Frsky Rx + OSD V2)
F3 Brushed Flight Controller (Frsky Rx + OSD V2)
F3 Brushed Flight Controller (Frsky Rx + OSD V2)
F3 Brushed Flight Controller (Frsky Rx + OSD V2)
F3 Brushed Flight Controller (Frsky Rx + OSD V2)

F3 Brushed Flight Controller (Frsky Rx + OSD V2)

Regular price $36.99 USD Sale price $26.99 USD Save $10.00 USD

This F3 FC board with OSD is on clearance sale.

Thanks Downtown FPV for making this review video for us.

V2 version is available now and there are 3 improvements based on the most popular F3 whoop Flight Controller. 

30A continuous drain current MOSFET. Lower to 8.5mΩ inner resistance value (4.5V). It has a noticeable power improvement in low battery voltage status or with 8x20/8.5x20 motors.

TX1 is available for VTX control. You could change VTX settings such as channel and output power in your Betaflight OSD or using your Taranis LUA Script. Here is the diagram when using the TBS Unify PRO Nano 5.8G VTX. 

Polarity reversed connection protection. Battery polar reversed connected. Bomb. This issue will never happens.

Key Features

  • The world's first compatible BetaFlight OSD, FrSky Rx, BetaFlight firmware, born for acro F3 flight controller for the Micro Whoop or Blade Inductrix quadcopter.
  • Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings
  • Designed to work with current Whoop Drone or Blade Inductrix setups
  • Built in Frsky D8 protocol native receiver (SBUS), compatible with almost ALL Frsky radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module
  • The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.

Specifications

  • CPU: STM32F303CCT6
  • Six-Axis: MPU6000
  • ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
  • Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
  • Firmware version: BETAFLIGHTF3 3.2.0
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Frsky D8 potocol (SBUS)
  • Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
  • Weight: 3.5g 

      BetaFlight OSD

      Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings. 

      How would do an OSD with the AIO cameras?

      There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. There is some examples.

      BETAFPV H02 Camera, FX806TC, VM275, FX805, Eachine XT02 etc aio camera vtx are available to use the OSD function.

      BETAFPV Support Freshdesk for BetaFlight OSD Setup.

      Tips: There is no current sensor on the FC boards. So the amperage value on the OSD is invalid.

      Status LED

      This board has 3 LEDs to indicate the status, including Receiver LED ( Red ), FC Status LED ( Red ) and FC Power LED ( Blue ). FC Status LED and Power LED are on the top of the board and Receiver LED is on the button of the board.

      LED

      Status

      Description

      Receiver LED ( Red )

      Solid

      Connected or in bind mode

      Receiver LED ( Red )

      Flashing

      Not connected

      Power LED ( Blue )

      Solid

      Power on

      Status LED ( Red )

      Solid

      Motor Armed

      These are 2 high brightness green LEDs on each side of the board. You could find your drone easily when flying.

      Frsky Receiver

      Currently the built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules with International Firmware. With SBUS connection protocol, it has a noticeable improvement when the drone turn around.

      Some pilots would complaint that it is definitely not a long range FC. It looses signal with my transmitter far too often and for what appears to be no reason. This issue is often caused by the location of the antenna. You should keep the antenna away from the FC board to get a stronger signal. For example, run the singal upwards. Thanks for Harley Finberg's advice.

      Assemble Guide

      The mounting pattern of this board is compatible with all the Whoop Drone airframes, like the original stock Blade Inductrix frame or the Beta75 75mm frame. For other frames like Eachine E010 or E011, a little bit modify is need.

        Package

        • 1 * F3 OSD brushed flight controller V2 ( 55mm PH-JST 2.0 power cable soldered)
        • 4 * M1.2x4mm screws (Fit for stock Inductrix frame)
        • 4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
        • 4 * Anti-vibration ruber dampers

        User Manuals

        Go to BETAFPV Support Freshdesk for F3 Brushed Flight Controller

          Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

          For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

          In almost all cases, we will work with you to debug your issue firstly. 

          Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

          NOTE: The refund amount is limited to the purchase price of the item.

          Directly Send Ticket: Create a new ticket

          *We do not accept ALL kinds of returns.

          *All sales are final.

          1.Shipping Time and Rules

          1.1 Estimated Shipping Time

          Expedited Shipping: 3-7 working days

          Standard Shipping (Registered Mail): 12-30 working days

          Please note:

          • There are estimated delivery time only, so BETAFPV can not guarantee an exact delivery time.
          • The estimated delivery time may be longer if any battery is included in your order.
          • If an item is out of stock, typically it takes 1-2 or more weeks to ship.
          • Incorrect information that objects to the below 1.5 Address Information Requirement may result in unsuccessful delivery and delays in receiving your package.

          1.2 Track Package

          After the order is shipped, you will receive a notification email containing the tracking number (you need to register BETAFPV website when placing the order).

          Or log in to your BETAFPV account and look at your order history which will show if it was shipped and provide a tracking link, if available, given your selected shipping methods. If your order status shows shipped but you do not see tracking that means your order is packaged and will be shipped shortly. If your status is processing it means that we have received your order and will be shipping as soon as possible.

          You can also enter the tracking number to check your package shipment status below. Please contact BETAFPV customer support for help if you are not able to track it.

          1.3 Batteries Shipping

          Some countries or remote regions are forbidden to ship stand-alone batteries due to restricted Customs rules.

          We will notify you if we are unable to ship batteries to your location. For expedited shipping like DHL, stand-alone batteries are prohibited to be shipped.Devices packed with less than or equal to two batteries like drones are available to be shipped. Devices in which Batteries contained like transmitters or goggles are accepted to be shipped without limits.

          Battery Type Definitions

          • Stand-alone: Package ONLY contains batteries or cells; NO equipment
          • Packed with: Package contains equipment + cells or batteries that are NOT installed in the equipment. For example, BNF drones with batteries or RTF drone kits.
          • Contained in: Package has lithium batteries contained in equipment (properly installed in the equipment they are intended to operate). For example, radio transmitter or goggles.

          1.4 List of Countries or Region That Prohibit From Importing Drones or Batteries

          Choosing standard shipping will be restricted.

          Asia: India, Indonesia, Malaysia, Vietnam, Philippines, Pakistan, Oman

          Africa: South Africa

          Region(Prohibit batteries): Hawaii, Puerto Rico, APO/FPO

          Note: It will be available for drones shipment if you would like to choose expedited shipping like DHL.

          1.5 Address Information Requirement

          For orders from below countries or regions below, address information has specially required. Please carefully read the following information. Incorrect information may result in unsuccessful delivery and delays in receiving your package.

          Ukraine: Due to logistical restrictions, we are currently unable to ship any drones including any FPV Kits to Ukraine while batteries, frames, and other accessories can still be shipped.

          If you wish to purchase drones or kits, we apologize for the inconvenience and recommend either waiting for updates on shipping or removing the drones or kits in your order, or you could also considering purchasing from our authorized agent in Ukraine (https://rc-store.com.ua)

          Germany: Please ensure that the street address and house number information is provided in full. Omissions are not allowed.

          Japan: Please provide the full street address and house number information. Abbreviations with only numbers are not permitted.

          Australia: Please provide the correct postal code that matches the city, and ensure that the city name is written correctly without any omissions or abbreviations. Search postcodes for all suburbs and locations around Australia here. (https://auspost.com.au/postcode)

          Hong Kong or Macao: Please fill address and name in Chinese (traditional).

          Taiwan: Please fill address and name in Chinese (traditional), and provide personal ID number due to Customs requirement.

          South Korea: Please provide personal clearance code. You can apply for it from the below link if you do not have one.

          https://unipass.customs.go.kr/csp/index.do

          Brazil: Please provide your tax number (CPF) in your address.

          Chile: Please provide your individual tax number in your address.

          Indonesia: Please provide your personal ID number in your address. Provide NPWP number if you place order as company.

          PO Boxes/APO/FPO Addresses: Shipments to PO Boxes, APO, FPO may be declined.

          1.6 BETAFPV Assume No Responsibility For Delayed Or Rejected Orders Due To The Following Reasons

          • Shipping time might be delayed for 3-7 days for transportation to remote regions. It might be 7 days longer if ships to islands area like Hawaii, Puerto Rico, Canary Islands etc.
          • Delay or delivery failure because of the consignee’s actions. These actions include, but are not limited to: changing the address after shipment, entering an unknown address or wrong address, entering incorrect contact information, and refusing to receive, etc.
          • Delay due to force majeure. “Force majeure” means an unforeseen, inevitable, or insurmountable objective situation and other objective conditions that cause delayed shipping, including, but not limited to: national or regional air or ground transportation system controls or interruptions (e.g., weather reasons), communication system interference or malfunction, government actions, postal administration policy changes, wars, earthquakes, typhoons, floods, fires, heavy rain, heavy fog, and other similar events.
          • Mail and packages cannot be delivered to the consignee’s address during weekends, national holidays, and festivals.
          • The consignee address is a school, hotel, unit, or residential community where the courier has no access. Please provide a permanent street address.

          *Please confirm your address before payment. If you enter the wrong address, please contact BETAFPV customer support in a timely manner.

          2.Shipping Method and Fee

          2.1 Standard Shipping

          We offer free standard shipping on orders of $99.99 or more. If your order does not qualify for free shipping, the shipping fee will be charged $5 on orders of $20 - $99.98; charged $10 on orders of less than $20. (Shipping fee will be different when delivering to remote countries/regions.)

          Products with big volume are excluded from free shipping rule due to dimensional weight calculated by shipping company.

          The product collections list is as follows:

          2.2 Expedited Shipping

          We offer expedited shipping service worldwide including islands area. The shipping fee will be shown on the check-out page once the expedited shipping method is chosen.

          Note: Purchasers are responsible for customs duties, taxes, customs clearance and other costs incurred when choosing expedited shipping.

          2.2 Additional Shipping Fee

          There are certain situations where you may be required to pay extra shipping fees.

          Expedited Shipping with Batteries: When choosing expedited shipping and placing an order that includes more than 2 batteries, which unfollows the 1.3 Batteries Shipping policy, an extra shipping fee will be applied to cover the separate shipping of the batteries.

          Reshipping Costs: Packages returned due to incorrect customer-provided addresses or the customs clearance cannot be completed due to customer-related issues, need to be reshipped will be subject to an additional shipping charge.

          3.FAQ

          3.1 How long until my order ships?

          All orders will be processed within 1-2 working days after your payment.

          If we are experiencing a high volume of orders or some products on back order, shipments may be delayed by a few days.

          If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

          3.2 After I place an order, how do I change my order before shipment?

          The nation cannot be changed once an order has been placed. If you need to change these details, please cancel the order and purchase again. Please contact BETAFPV customer support in 24 hours after placing the order if you need to change order product information or address.

          3.3 How do I cancel after I have placed the order, but it has not shipped?

          You can contact BETAFPV customer support for canceling if your order has not been shipped. If your order has been shipped less than 24 hours, please contact the customer service to help. We will try to hold your order from the shipping company.

          It is impossible to cancel if your order has been shipped over 24 hours.

          3.4 Under what circumstances will BETAFPV cancel an order unilaterally?

          Product(s) unavailable currently, BETAFPV tries to contact customers and does not get a reply in 7 days.

          High-Risk Order(s) identified by Credit Card bank or Paypal. To ensure your card safety, we will cancel your order.

          No Shipping Methods. If we are not able to ship to your location, Your order will be canceled.

          *The right of final interpretation of the shipping policy resides with BETAFPV

          *Policy information updated Feb 2024