F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller

F4 1S AIO Brushless Flight Controller

Regular price $39.99 USD Save $0.00 USD
F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! 
F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+, and Spectrum DSMX etc. Meanwhile, this version can handle the 2S power system. 

Bullet Point

  • Integrated with a 25mW VTX, this AIO board(Frsky/Futaba Rx) is ultralight only 3.92g, which can extremely save the weight of building a drone, perfectly suitable for the 1S weight-sensitive drone such as Meteor65 HD and HX100 SE.
  • F4 1S AIO FC(No Rx) not only integrates with the 25mW VTX but also supports a 1-2S power system, which is perfectly suitable for weight-sensitive drones such as Meteor75 and Beta85 Pro2
  • This AIO board also reserves a Plug & Play port for the C01 Camera, C01 Pro Camera, and BETAFPV Nano HD Camera, no soldering work needed, super convenient for installation.
  • Specially added with 2 RGB LED indicators, this board brings the drone an incredible light effect while pilots flying on the night. 
  • This board can handle 5A continuous current(6A burst), supports the 1S lipo battery, brings the drone a stronger flight performance. 
  • Come with a BT2.0 connector, it solves the problem of voltage sag, the discharge can be more efficient, which brings this board a better performance on function for power and responsiveness. 

Specification of F4 1S AIO FC(SPI Rx)

  • Item: F4 1S AIO FC(Frsky/Futaba Rx)
  • Weight: 3.92g(without antenna and BT2.0 connector)
  • VTX Power: 25mW
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • Receiver: Support Frsky Receiver/ Futaba Receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting hole size: 29mm x 29mm / suitable for almost all kinds of whoop frame

Specification of ESC

  • Built-in ESC with 5A continuous and peak 6A current
  • Input voltage: 1S Lipo
  • ESC firmware: O_H_5_REV16_8.HEX 
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
  • 4 Indicators: Receiver indicator (Blue)/Flight control status indicator (Green)/Flight control power indicator (Red)/VTX indicator (Pink)

Diagram for F4 1S AIO FC(SPI Rx)

SPI Receiver CC2500

Come with the build-in SPI Receiver CC2500, F4 1S AIO FC(SPI Rx) can compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default Frksy protocol is Frsky D16, if pilots buy the wrong receiver of the SPI Frsky version or upgrade the wrong firmware accidentally, which need to switch the protocol to Futaba or FrskyD8, please upgrade the Betaflight Firmware according to this tutorial. 

Configuration

Protocol

FRSKY_D

Frsky D8

FRSKY_X

Frsky D16 FCC

FRSKY_X_LBT

Frsky D16 LBT

SFHSS

Futaba S-FHSS

Status LED for F4 1S AIO FC(SPI Rx)

There are 4 LEDs on the bottom of the board to indicate the status, including the Receiver LED ( Blue), FC Status LED(Green), FC Power LED ( Red ), and VTX LED(Pink).

LED

Status

Description

Receiver LED ( Blue)

Solid

Connected or in bind mode

Receiver LED ( Blue )

Flashing

Not connected

Power LED ( Red )

Solid

Power on

Status LED ( Green )

Solid

Motor Armed

Status LED ( Green )

Flashing

Motor Disarmed

Status LED ( Green )

Off

Bind

VTX LED ( Pink )

Flash Slowly

Work

Recommended Parts of F4 1S AIO FC(Frsky/Futaba Rx)

Specification of F4 1S AIO FC(No Rx)

  • Item: F4 1S AIO FC(No Rx)
  • Weight: 3.83g (without antenna and BT2.0 connector)
  • VTX Power: 25mW
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • Receiver: Support External Receiver, SPI Receiver, including Frsky XM/XM+ receiver, Futaba receiver, Crossfire receiver, and DSMX receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting hole size: 29mm x 29mm / suitable for almost all kinds of whoop frame

Specification of ESC

  • Built-in ESC with 5A continuous and peak 6A current
  • Input voltage: 1-2S Lipo
  • ESC firmware: S_H_70_REV16_7.HEX 
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
  • 4 Indicators: Receiver indicator (Green)/Flight control status indicator (Blue)/Flight control power indicator (Red)/VTX indicator (Pink)

Diagram for F4 1S AIO FC(No Rx)

How to Connect the External Rx to the FC(No Rx)

For more convenience to the pilots, we specially design the Plug & Play SPI Frsky Rx for the F4 1S AIO FC(No Rx), no soldering work needed, super easy to install.  

Receiver Connection Diagram

Status LED for F4 1S AIO FC(No Rx)

There are 4 LEDs on the bottom of the board to indicate the status, including the Receiver LED (Green), FC Status LED(Blue), FC Power LED ( Red ) and VTX LED(Pink).

LED

Status

Description

Receiver LED ( Green)

Solid

Connected or in bind mode

Receiver LED ( Green)

Flashing

Not connected

Power LED ( Red )

Solid

Power on

Status LED ( Blue )

Solid

Motor Armed

Status LED ( Blue )

Flashing

Motor Disarmed

Status LED ( Blue )

Off

Bind

VTX LED ( Pink )

Flash Slowly

Work

Recommended Parts of F4 1S AIO FC(No Rx)

Package

  • 1 * F4 1S AIO Brushless Flight Controller
  • 4 * M1.2x4mm Screws
  • 4 * M1.4x5mm Screws
  • 4 * Anti-vibration Rubber dampers

    Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

    For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

    In almost all cases, we will work with you to debug your issue firstly. 

    Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

    NOTE: The refund amount is limited to the purchase price of the item.

    Directly Send Ticket: Create a new ticket

    *We do not accept ALL kinds of returns.

    *All sales are final.

    1.Shipping Time and Rules

    1.1 Estimated Shipping Time

    Expedited Shipping: 3-7 working days

    Standard Shipping (Registered Mail): 12-30 working days

    Please note:

    • There are estimated delivery time only, so BETAFPV can not guarantee an exact delivery time.
    • The estimated delivery time may be longer if any battery is included in your order.
    • If an item is out of stock, typically it takes 1-2 or more weeks to ship.
    • Incorrect information that objects to the below 1.5 Address Information Requirement may result in unsuccessful delivery and delays in receiving your package.

    1.2 Track Package

    After the order is shipped, you will receive a notification email containing the tracking number (you need to register BETAFPV website when placing the order).

    Or log in to your BETAFPV account and look at your order history which will show if it was shipped and provide a tracking link, if available, given your selected shipping methods. If your order status shows shipped but you do not see tracking that means your order is packaged and will be shipped shortly. If your status is processing it means that we have received your order and will be shipping as soon as possible.

    You can also enter the tracking number to check your package shipment status below. Please contact BETAFPV customer support for help if you are not able to track it.

    1.3 Batteries Shipping

    Some countries or remote regions are forbidden to ship stand-alone batteries due to restricted Customs rules.

    We will notify you if we are unable to ship batteries to your location. For expedited shipping like DHL, stand-alone batteries are prohibited to be shipped.Devices packed with less than or equal to two batteries like drones are available to be shipped. Devices in which Batteries contained like transmitters or goggles are accepted to be shipped without limits.

    Battery Type Definitions

    • Stand-alone: Package ONLY contains batteries or cells; NO equipment
    • Packed with: Package contains equipment + cells or batteries that are NOT installed in the equipment. For example, BNF drones with batteries or RTF drone kits.
    • Contained in: Package has lithium batteries contained in equipment (properly installed in the equipment they are intended to operate). For example, radio transmitter or goggles.

    1.4 List of Countries or Region That Prohibit From Importing Drones or Batteries

    Choosing standard shipping will be restricted.

    Asia: India, Indonesia, Malaysia, Vietnam, Philippines, Pakistan, Oman

    Africa: South Africa

    Region(Prohibit batteries): Hawaii, Puerto Rico, APO/FPO

    Note: It will be available for drones shipment if you would like to choose expedited shipping like DHL.

    1.5 Address Information Requirement

    For orders from below countries or regions below, address information has specially required. Please carefully read the following information. Incorrect information may result in unsuccessful delivery and delays in receiving your package.

    Ukraine: Due to logistical restrictions, we are currently unable to ship any drones including any FPV Kits to Ukraine while batteries, frames, and other accessories can still be shipped.

    If you wish to purchase drones or kits, we apologize for the inconvenience and recommend either waiting for updates on shipping or removing the drones or kits in your order, or you could also considering purchasing from our authorized agent in Ukraine (https://rc-store.com.ua)

    Germany: Please ensure that the street address and house number information is provided in full. Omissions are not allowed.

    Japan: Please provide the full street address and house number information. Abbreviations with only numbers are not permitted.

    Australia: Please provide the correct postal code that matches the city, and ensure that the city name is written correctly without any omissions or abbreviations. Search postcodes for all suburbs and locations around Australia here. (https://auspost.com.au/postcode)

    Hong Kong or Macao: Please fill address and name in Chinese (traditional).

    Taiwan: Please fill address and name in Chinese (traditional), and provide personal ID number due to Customs requirement.

    South Korea: Please provide personal clearance code. You can apply for it from the below link if you do not have one.

    https://unipass.customs.go.kr/csp/index.do

    Brazil: Please provide your tax number (CPF) in your address.

    Chile: Please provide your individual tax number in your address.

    India: Please provide your Adhaar Card/Pan Card/KYC number in your address. Provide tax number if you place order as company.

    PO Boxes/APO/FPO Addresses: Shipments to PO Boxes, APO, FPO may be declined.

    1.6 BETAFPV Assume No Responsibility For Delayed Or Rejected Orders Due To The Following Reasons

    • Shipping time might be delayed for 3-7 days for transportation to remote regions. It might be 7 days longer if ships to islands area like Hawaii, Puerto Rico, Canary Islands etc.
    • Delay or delivery failure because of the consignee’s actions. These actions include, but are not limited to: changing the address after shipment, entering an unknown address or wrong address, entering incorrect contact information, and refusing to receive, etc.
    • Delay due to force majeure. “Force majeure” means an unforeseen, inevitable, or insurmountable objective situation and other objective conditions that cause delayed shipping, including, but not limited to: national or regional air or ground transportation system controls or interruptions (e.g., weather reasons), communication system interference or malfunction, government actions, postal administration policy changes, wars, earthquakes, typhoons, floods, fires, heavy rain, heavy fog, and other similar events.
    • Mail and packages cannot be delivered to the consignee’s address during weekends, national holidays, and festivals.
    • The consignee address is a school, hotel, unit, or residential community where the courier has no access. Please provide a permanent street address.

    *Please confirm your address before payment. If you enter the wrong address, please contact BETAFPV customer support in a timely manner.

    2.Shipping Method and Fee

    2.1 Standard Shipping

    We offer free standard shipping on orders of $99.99 or more. If your order does not qualify for free shipping, the shipping fee will be charged $5 on orders of $20 - $99.98; charged $10 on orders of less than $20. (Shipping fee will be different when delivering to remote countries/regions.)

    Products with big volume are excluded from free shipping rule due to dimensional weight calculated by shipping company.

    The product collections list is as follows:

    2.2 Expedited Shipping

    We offer expedited shipping service worldwide including islands area. The shipping fee will be shown on the check-out page once the expedited shipping method is chosen.

    Note: Purchasers are responsible for customs duties, taxes, customs clearance and other costs incurred when choosing expedited shipping.

    2.2 Additional Shipping Fee

    There are certain situations where you may be required to pay extra shipping fees.

    Expedited Shipping with Batteries: When choosing expedited shipping and placing an order that includes more than 2 batteries, which unfollows the 1.3 Batteries Shipping policy, an extra shipping fee will be applied to cover the separate shipping of the batteries.

    Reshipping Costs: Packages returned due to incorrect customer-provided addresses or the customs clearance cannot be completed due to customer-related issues, need to be reshipped will be subject to an additional shipping charge.

    3.FAQ

    3.1 How long until my order ships?

    All orders will be processed within 1-2 working days after your payment.

    If we are experiencing a high volume of orders or some products on back order, shipments may be delayed by a few days.

    If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

    3.2 After I place an order, how do I change my order before shipment?

    The nation cannot be changed once an order has been placed. If you need to change these details, please cancel the order and purchase again. Please contact BETAFPV customer support in 24 hours after placing the order if you need to change order product information or address.

    3.3 How do I cancel after I have placed the order, but it has not shipped?

    You can contact BETAFPV customer support for canceling if your order has not been shipped. If your order has been shipped less than 24 hours, please contact the customer service to help. We will try to hold your order from the shipping company.

    It is impossible to cancel if your order has been shipped over 24 hours.

    3.4 Under what circumstances will BETAFPV cancel an order unilaterally?

    Product(s) unavailable currently, BETAFPV tries to contact customers and does not get a reply in 7 days.

    High-Risk Order(s) identified by Credit Card bank or Paypal. To ensure your card safety, we will cancel your order.

    No Shipping Methods. If we are not able to ship to your location, Your order will be canceled.

    *The right of final interpretation of the shipping policy resides with BETAFPV

    *Policy information updated Feb 2024

    Customer Reviews

    Based on 5 reviews
    80%
    (4)
    20%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    Adrian Garsia
    Works great, but I needed help setting it up for my meteor 65 hd

    Out of the box the FC needed betaflight and/or blheli configuration to get the props spinning in the proper directions, the camara visible in my goggles. and the motors starting once the arm switch was thrown. I got a lot of great help from support (big thanks to Anthony) so now everything works great. Don't be afraid to talk to support if your FC doesn't work as expected because it is likely that a simple change in Betaflight is all you need to get things working. good product, Great Support!

    E
    Edgar Reyes
    Very impressed

    I was hesitant to buy this FC but now I’m glad I did, is very easy to work with, soldering is optional, so I bought 3 more, and have them on different 1S tinywhoop builds with different kv motors and they fly so good.
    I know I will be buying more in the future.

    R
    Ruggero Parrotta

    ottimo prodotto e spedizione veloce

    Y
    Yozshen Dzhemalov

    F4 1S AIO Brushless Flight Controller

    J
    JAVIER COMPTE CATALAN
    Good 👍

    Really good for mounting my first FPV, easy and seamless.