BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2

BETAFPV Lite Brushed Flight Controller V2

Regular price $16.99 USD Save $0.00 USD

The stock firmware in the V2 board is upgraded since 2020 December. This new firmware is also used on Starter Kit 2 and Beta65S Lite drones at the same time. 

  • Support upgrading firmware via the USB port and PC Configurator easily.
  • Include a new mode named STARTER, it is the default mode for this board out of the factory.

Basic Manual for New Firmware

In the default STARTER mode, here is something new or different.

  • Power on first and after the system loads successfully, press the button and enter the binding status.
  • Use the switch SB in the radio transmitter to change the flying mode. The flight mode is "Level mode" if switch SB is down (LEVL-S). "Horizon mode" if switch SB is in the middle (HOR-S).  "Acro mode" if switch SB is up (ACRO-S).
  • Use the switch SC in the radio transmitter to change the VTX Channels. Available channels follow this sequence: 5733/5752/5771/5790/5809/5828/5847/5866 which corresponds to band B.

With the new firmware, if you want to use the original LiteSilverware features, like the stick sequences, change the PID value, etc, please change to the ADVANCED mode. Go to the OSD menu CONFIG page, select the MODE.  The right stick gimbal, pull left twice and right twice, the STARTER mode will change to ADVANCED mode. Then save and exit.

 

For more details, please check the manuals below. Both the manuals for the new firmware and the original Silverware firmware are available now.

Lite Brushed FC User Manual.

How to Upgrade New Firmware

If you have a Lite brushed V2 FC board, no matter which firmware it is, or whether the firmware is inside or not, you could upgrade the new firmware easily.

How to flash the firmware of Lite FC

DO NOT press and hold the button before inserting the battery. It will erase the firmware and need to re-flash the firmware according to the manual above.

Know More About V2

The Lite brushed FC V2 is available.

  • Integrate 25mW VTX, support change VTX channel brand via control.
  • Add LiteOSD information and OSD Menu.
  • Support firmware upgrade in DFU mode via USB port.
  • Integrate an altitude sensor ( altitude hold function is NOT available now).
  • 2 RGB LEDs

Since we released the world's first whoop FC with Silverware firmware in 2017, this board has become so popular among FPV pilots. Now we have upgraded to the V2 version with a ton of improvement. Also, the antenna is soldered in default.

Do you want to use your hobby radio transmitter (like Frsky QX7 / X9D etc) to control this drone in Bayang protocol? Want a long range control above 300m? High recommend this newest Bayang Lite RF module. Know more about this LiteModule here.

Key Features

  • The world's first FC board is compatible with Silverware firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.
  • Support level mode and acro mode. Also, it has the ability to change settings for custom builds or to adapt to personal preferences by stick gestures.
  • Designed to work with current whoop drone or Blade Inductrix frames
  • Built-in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module
  • The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.

 

Specifications

  • CPU: STM32F042
  • Six-Axis: MPU6050
  • ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
  • Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
  • Firmware version: Silverware firmware
  • Receiver: Bayang protocol
  • Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
  • Weight: 2.5g 

Silverware & LiteOSD

Silverware is firmware for some micro quadcopters, which support level mode and acro mode. So you could use this on whoop FPV racing. Also, it has the ability to change settings for custom builds or to adapt to personal preferences. 

LiteOSD is also integrated into the V2 board. So that you could set up many configurations according to your own preference easily. The method of entering the OSD Menu on Lite Brushed FC is the same as Betaflight. Make sure the drone is disarmed when entering OSD Menu on Lite 1S Brushless FC.



-Use Mode 2 (American Mode) as an example-
Note: The left throttle stick should be at the middle position and then pull left.
Note: AETR is the default channel mapping of Lite FC. If you can not enter the OSD menu, it might cause by unmatched channel mapping.

If you use a toy transmitter like LiteRadio 1, and also active the TOY_TX option in the OSD menu. You could enter the OSD menu when the throttle stick in the lowest position.

Supported Radio Transmitter

Currently, the built-in receiver is compatible with the Bayang protocol. Here is a listing of radio transmitters that could be compatible with this FC board.

If not sure whether your radio transmitter could support this FC board, please email us ( info@betafpv.com) for help.

For example, if you have a Frsky Tanaris QX7 / X9D radio transmitter and want to try this FC board, just plug in a BETAFPV LiteModule RF and done.

Some pilots would complain that it is definitely not a long range FC. It loses signal with my transmitter far too often and for what appears to be no reason. This issue is often caused by the location of the antenna. You should keep the antenna away from the FC board to get a stronger signal. For example, run the signal upwards. Thanks for Harley Feinberg's advice.

    Package

    • 1 * BETAFPV Lite Brushed Flight Controller V2.0 with Antenna
    • 4 * M1.2x4mm screws (Fit for stock Inductrix frame)
    • 4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
    • 4 * Anti-vibration rubber dampers

    __________________________________________________________________

    The description below are all for the Lite Brushed V1 (black color) board.

     

    By default in the V1 board, Silverware use stick sequences, which are also called gestures, to change modes, tune PIDs, calibrate accelerometer or save settings.

    For example, with the Frsky QX7 radio transmitter, change the FC's mode between level and acro. Just move the right stick as shown below.

    BETAFPV Lite Brushed Flight Controller

    For all the gestures in Silverware, please Go to Basic User Manual in support Freshdesk.

    This V1 board has 2 LEDs to indicate the status, including red LED ( at the front) and blue LED ( at the rear). 

    LED

    Status

    Description

    Both

    Flashing slowly at the same time

    Binding status

    Both

    Solid

    Connected

    Both

    Flashing quickly and then be solid

    Mode changed

      Shipping Method & Delivery Times

      We offer the following shipping options:

      Expedited Shipping: Estimated delivery in 3-7 working days via DHL/FedEx.

      Standard Shipping: Estimated delivery in 12-30 working days via registered mail.

      Please expect a processing time of 1-2 business days (Mon–Fri, excluding holidays).

      IMPORTANT:

      • Delivery estimates are not guaranteed and may vary due to shipping address, customs clearance and carrier delays.
      • Battery orders: Expect more business days for safety inspections.
      • Out-of-stock items: Ships in 1–2 weeks (we’ll notify you via email).
      • Address errors: Double-check your shipping details during checkout. Incorrect/missing addresses cause delays or failed deliveries.

      Shipping Costs

      1. Standard Shipping

      We offer free standard shipping on all orders of $99.99 or more. For orders between $20 – $99.98, a flat rate of $5 applies. For orders under $20, a flat rate of $10 applies.

      IMPORTANT:

      • Starting April 24, all U.S. orders will include a flat $10 fee to offset recent increases in shipping costs and tariffs. To learn more details, check U.S. Tariff Policy Change: What You Need to Know.
      • While we cover all taxes and tariffs for Standard Shipping, please be aware that certain countries (including but not limited to India, Brazil, Israel, Argentina, and Turkey) may still impose additional customs fees that are beyond our control. These fees are determined by local regulations and will be the responsibility of the recipient.

      2. Expedited Shipping

      We offer expedited shipping service worldwide including islands area. Shipping fees are calculated automatically at checkout based on your location and order weight.

      IMPORTANT: Customers are fully responsible for customs duties, taxes, customs clearance and other costs incurred when choosing expedited shipping. If a shippemnt is returned due to unpaid import fees, return shipping costs will be charged to the customer, and no refunds will be issued for the original order.

      3. Additional Shipping Fee

      There are certain situations where you may be required to pay extra shipping fees.

      • Products with large dimensions or weight: Products with large dimensions or weight are excluded from free shipping rule due to carrier dimensional weight calculations. (Including: FPV Goggles, BETAFPV Gates & Flags, RTF FPV Whoop Kits, LiteRadio Series radio transmitter, Storage Cases)
      • Remote countries/regions: Orders shipped to remote countries or regions (e.g., islands, rural areas) may require adjusted shipping fees based on carrier surcharges.
      • Expedited Shipping with Batteries: Expedited Shipping orders containing more than 2 batteries that exceed the limits outlined in our Battery Shipping rule below will incur extra fees to cover separate battery shipments.
      • Reshipping Costs: Packages returned due to incorrect addresses or customs clearance failures (e.g., unpaid duties) will be subject to reshipping fees. Customers must cover these costs before redelivery.

      Shipping Rules

      1. Battery Shipping

      Some countries or remote regions are forbidden to ship stand-alone batteries due to restricted customs and safety regulations. If your location restricts battery shipments, we will notify you promptly and adjust your order accordingly. Review the 2. Countries/Regions Where Battery or Drone Shipping Is Restricted below for details.

      Expedited Shipping Battery Shipping: Stand-alone batteries are prohibited for expedited shipping. However, drones packed with less than or equal to two batteries or devices with bulit-in batteries (e.g., transmitters, goggles) may still qualify for expedited delivery.

      Battery Type

      International Expedited Shipping

      No batteries

      Accepted

      Contained in

      Accepted

      Packed with (no more than 2 batteries)

      Accepted

      Stand-alone

      Prohibited

      Battery Type Definitions

      • Stand-alone: Package ONLY contains batteries or cells; NO equipment.
      • Packed with: Package contains equipment + cells or batteries that are NOT installed in the equipment. For example, BNF drones with batteries or RTF drone kits.
      • Contained in: Package has lithium batteries contained in equipment (properly installed in the equipment they are intended to operate). For example, radio transmitter or goggles.

      2. Countries/Regions Where Battery or Drone Shipping Is Restricted

      Due to customs regulations and carrier restrictions, we cannot ship drones or batteries to the following destinations:

      • Drones & Batteries Restricted: Brazil, Israel, Armed Forces Europe (APO/FPO/DPO), P.O. Box, Dominican Republic, Maldives
      • Batteries Restricted: Cyprus, Cote d'Ivoire, Brunei, India, Argentina, Turkey, Serbia, Iceland, Guadeloupe, Georgia, Belarus, Bosnia and Herzegovina, Montenegro, Saint Barthelemy, Oman, Armenia, Qatar, Costa Rica, Kuwait, Jamaica, Malta, Jersey, New Caledonia, Kyrgyzstan, Burundi, French Guiana, Mauritius, Greenland, Lebanon, Venezuela, Sri Lanka, Indonesia, U.S. remote islands

      Note: The list is subject to change without prior notice due to evolving customs regulations, carrier restrictions, and local legislation.

      3. Address Requirements

      To ensure successful delivery, please carefully follow these requirements based on your location. Incorrect or incomplete information may cause delays or failed deliveries.

      Japan & Germany: Street name and number, apartment/unit number (if applicable) are required. Omissions are not allowed.

      Australia & United States: Provide the postal code that matches the city, and ensure that the city name is written correctly without any omissions or abbreviations.

      Hong Kong, Macao, Taiwan, and Mainland China: Address must be written in Chinese characters.

      Tax ID Required for Customs Clearance for orders to the following countries:

      • South Korea: Personal Clearance Code
      • Brazil: Cadastro de Pessoas Físicas (CPF)
      • Chile: Tax Identification Number (RUT)
      • India: Aadhaar Card/Pan Card/KYC number
      • Mexico: TAX ID (RFC) / Personal ID (CURP)
      • Indonesia: Nomor Pokok Wajib Pajak (NPWP)

      Delayed Or Rejected Orders Liability

      BETAFPV is not liable for delayed or rejected packages resulting from circumstances beyond our reasonable control. This includes, but is not limited to:

      Delays of shipments to remote regions: Shipping time might be delayed for 3-7 days to remote regions or over 7 days to island destinations like Hawaii, Puerto Rico, Canary Islands, etc.

      Customer-caused delay or delivery failure: These actions include, but are not limited to address changes after shipment, incorrect/incomplete addresses, invalid contact information, and refusal to accept delivery, etc.

      Force majeure: It means unforeseen, inevitable, or insurmountable objective situation and other objective conditions that cause delayed shipping, including, but not limited to: national or regional air or ground transportation system controls or interruptions (e.g., weather reasons), communication system interference or malfunction, government actions, postal administration policy changes, wars, earthquakes, typhoons, floods, fires, heavy rain, heavy fog, and other similar events.

      Packages cannot be delivered to your address during weekends, national holidays, and festivals.

      The address is a school, hotel, unit, or residential community where the courier has no access. Please provide a permanent street address.

      *Please confirm your address before payment. If corrections are needed, please contact BETAFPV customer support in a timely manner.

      Tracking Your Package

      Once your order ships, you’ll receive a notification email with the tracking number. You can also check your order status by logging into your BETAFPV account dashboard, where shipped orders display tracking links based on your selected shipping method. If your order status shows “Shipped” but no tracking details are visible, this means your package is prepared and awaiting carrier pickup. A status of “Processing” indicates we’ve received your order and are preparing it for shipment.

      Please note that you may receive more than one Shipment Notification E-mail if item(s) from your order are shipping separately.

      You can also enter the tracking number to check your package shipment status below. If you encounter issues tracking your order, contact BETAFPV customer support for assistance.

      FAQ

      1. How long until my order ships?

      All orders typically will be processed within 1-2 working days after your payment. Delays may occur during high order volumes or backorder situations.

      If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is active and remember to check the email for updates.

      2. After I place an order, how do I change my order before shipment?

      Country selections cannot be modified after checkout. If you need to change these details, please cancel the order and purchase again. Please contact BETAFPV customer support within 24 hours after placing the order if you need to change order product information or address.

      3. How do I cancel after I have placed the order, but it has not shipped?

      You can contact BETAFPV customer support for canceling if your order has not been shipped. If your order has been shipped less than 24 hours, please contact the customer service and we will try to hold your order from the shipping company.

      It is impossible to cancel if your order has been shipped over 24 hours.

      4. Under what circumstances will BETAFPV cancel an order unilaterally?

      We reserve the right to cancel orders for:

      • Unavailable product(s): BETAFPV tries to contact customers and does not get a reply in 7 days.
      • High-risk Order(s) identified by banks/Paypal: To ensure your card safety, we will cancel your order.
      • Unshippable destinations: If we are not able to ship to your location, your order will be canceled.

      *BETAFPV reserves the right to update this policy. Last revised May 2025.

      Other Pilots also purchased