This FC has all the goodies on board you need and works well so far.
But: Even I had no issues myself with this FC, I would strongly recommend to buy the all new FC from BetaFPV the F4 2-3S 20A AIO instead. It can handle LiPo up to 3S, has ESCs with rating of 20A and a better power supply for the O3 unit!!! And lots more for almost the same money.
I installed all my Pavo Picos with the new controller now, and glad I did.
Quando verrà rilasciata la nuova versione del firmware per AT32F435? È possibile installare betaflight 4.4 se si usa una ricevente esterna non spi?
If you plan to use a non-SPI external receiver with the BetaFPV F4 1S 12A AIO Brushless Flight Controller V3, you may need to make some additional settings and configurations. Before installing Betaflight 4.4 or any other version, ensure that you consider the following:
UART Availability: Check the available UART interfaces and types on the flight controller board. If your external receiver requires a UART interface for connection, make sure there are enough available UART ports.
Hardware Connections: According to the requirements of your external receiver, make the correct connections between the receiver and the flight controller's UART or appropriate pins.
Configuration Settings: Once the hardware connections are made, you'll need to make the necessary settings in the Betaflight configuration interface. In the Ports tab, configure the selected UART port as 'Serial RX' to receive signals from the external receiver.
Receiver Type Selection: In the Configuration tab of the configuration interface, select the correct receiver type. If your external receiver is not listed, choose the option compatible with its communication protocol.
There is no way to use analog vtx with that FC?
Hey dear, yes, the F4 1S 12A AIO Brushless FC V3 is specifically designed to work seamlessly with HD VTX.