Finally, BETAFPV is in the community of Flysky pilots.
This F3 flight controller intergrate BetaFlight OSD, SPI FlySky Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter.
Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings
Designed to work with current Tiny Whoop or Blade Inductrix setups
Built in SPI Flysky protocol native receiver, compatible with almost ALL Flysky radios(e.g. FS-I6/FS-I6S) or Flysky compatible transmitter like Turnigy Evolution etc
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
Note: The silkscreen of the "M1, M2, M3, M4" on the board are messed up.
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight CRAZYBEEF3FS
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI Flysky AFHDS 2A protocol
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings.
How would do an OSD with the AIO cameras?
There is a video in and out on the fc itself, labeled CAM and VTX as show below.
This FC board header pins connector are suitable for the Z02 AIO camera. No cables needed. Just plug and play.
Tips: There is no current sensor on the FC boards. So the amperage value on the OSD is invalid.
There are 4 LEDs on the bottom of the board to indicate the status, including Receiver LED ( Red), FC Status LED ( Blue) and FC Power LED ( Green, 2pcs).
Receiver LED (Red)
Receiver LED (Red)
Receiver LED (Red)
Power LED (Green)
Power on (Battery)
Status LED (Blue)
SPI Flysky Receiver
This FC board has a build-in SPI Flysky receiver. You should choose the SPI RX support in the Betaflight GUI. In default, it support Flysky AFHDS 2A protocol. Below is the correct configuration in Betaflight GUI.
Note: the red receiver LED will turn off when in successful connection.
Click the bind-button meanwhile powering on the board, either by connecting the battery or USB power. Then the receiver will enter bind mode, indicated by red receiver LED flashs quickly.
Now, on the radio, enter the bind status(or what it takes to enter bind status). This receiver only support AFHDS 2A mode and does not support AFHDS mode, please turn on this mode in your radio transmitter before use.
The red receiver LED should turn off when binding is completed and successful.
For detail procedure of binding, please check the SPI Flysky Receiver Binding Manual.
Some pilots would complaint that it is definitely not a long range FC. It looses signal with my transmitter far too often and for what appears to be no reason. This issue is often caused by the location of the antenna. You should keep the antenna away from the FC board to get a stronger signal. For example, run the singal upwards. Thanks for Harley Finberg's advice.
The mounting pattern of this board is compatible with all the Tiny Whoop airframes, like the original stock Blade Inductrix frame or the Beta75 75mm frame. For other frames like Eachine E010 or E011, a little bit modify is need.
Betafpv.com offers a (30) daymanufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.
For merchandise was confirmed as genuinely defective（Product Design problem & Quality issues）, we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.
In almost all cases, we will work with you to debug your issue firstly.
Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.
NOTE: The refund amount is limited to the purchase price of the item.
All orderswill be processedwithin 2 business days of your payment clearing. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders or some products out of stock, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email.
Shipping Methods and Charges
Betafpv.com is currently able to ship orders to most international addresses. All of the parcels are shipped by air. In addition, some countriesare not available to ship battery only without purchasing of whoop drone(Logistics company restrictions).
Two shipping methods are provided for you now.
Expedited Shipping (DHL)
If you choose expedited shipping, you need to pay weight-based rates, which will be calculated automatically. If you choose standard shipping, then the shipping fee depends on the value of your orders. If your order is less than 99.99USD, you have to pay 5 USD for the shipping fee. Free shipping is offered if your order is over 99.99USD.
Note: Some remote countries will be charged shipping fees according to the quotation of the logistics company.
Some special products are not applied to this rule.
The product list as follows:
LiteRadio 2 Radio Transmitter
VR01 FPV Goggles
Micro Whoop Drone Storage Case
Storage Case for 2-4S Micro Drone
Storage Case for 1S Micro Drone
BETAFPV Xmas Race Flag+LED Strip Light (1 PCS)
BETAFPV Xmas Arch Gate+LED Strip Light (1 PCS)
With those big volume products in your package, while your package is more than 99USD, we are sorry that we still need to charge you some shipping fee.
Countries & Area That Can't Be Shipped Battery Without Purchasing of Whoop Drone
We can't ship the battery to the following countries: Indonesia, Korea, New Zealand, Middle East, Indonesia, Philippines, Vietnam, India, Mexico, UAE, Brunei, Finland, Brazil, Oman and other remote areas for now.
If your place doesn't have a Chanel to ship, We will send an email to inform you. Sorry for the inconvenience.
For European customers, if your parcel includes only batteries, it will take a longer time for the parcel to arrive in your country. Click hereto track your parcel.
We are terribly sorry that we can’t ship more than2pcs battery(if your package has a drone) by DHL because of the strict restriction of battery shipping.
DHL can only ship two batteries at most and there must be a drone in the parcel too.
If your package has a BNF but more than 2pcs battery, we could ship the extra batteries by standard shipment, it will take about 7 - 15 days. And we will ship other products by DHL.
If your package has no BNF but has a battery, we could ship the batteries by standard shipment, it will take about 7 - 15 days. And we will ship other products by DHL, or we could partial refund of the battery to you.
How To Track My Parcel
We provide trackable shipping service to most of the package. Please click here to reach detail information.
Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.
We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.
Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion.
Damaged Box or Incorrect Item(s)
If you receive damaged or incorrect item(s), contact Customer Support no later than 5 business days of receipt of your shipment to make the necessary corrections.
* All duties and taxes are the responsibility of the customer.
* Betafpv.com accepts no responsibilities and liabilities for delay in shipping time as this is beyond our control.