BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2
BETAFPV Lite Brushed Flight Controller V2

BETAFPV Lite Brushed Flight Controller V2

Regular price $16.99 USD Save $0.00 USD

The stock firmware in the V2 board is upgraded since 2020 December. This new firmware is also used on Starter Kit 2 and Beta65S Lite drones at the same time. 

  • Support upgrading firmware via the USB port and PC Configurator easily.
  • Include a new mode named STARTER, it is the default mode for this board out of the factory.

Basic Manual for New Firmware

In the default STARTER mode, here is something new or different.

  • Power on first and after the system loads successfully, press the button and enter the binding status.
  • Use the switch SB in the radio transmitter to change the flying mode. The flight mode is "Level mode" if switch SB is down (LEVL-S). "Horizon mode" if switch SB is in the middle (HOR-S).  "Acro mode" if switch SB is up (ACRO-S).
  • Use the switch SC in the radio transmitter to change the VTX Channels. Available channels follow this sequence: 5733/5752/5771/5790/5809/5828/5847/5866 which corresponds to band B.

With the new firmware, if you want to use the original LiteSilverware features, like the stick sequences, change the PID value, etc, please change to the ADVANCED mode. Go to the OSD menu CONFIG page, select the MODE.  The right stick gimbal, pull left twice and right twice, the STARTER mode will change to ADVANCED mode. Then save and exit.

 

For more details, please check the manuals below. Both the manuals for the new firmware and the original Silverware firmware are available now.

Lite Brushed FC User Manual.

How to Upgrade New Firmware

If you have a Lite brushed V2 FC board, no matter which firmware it is, or whether the firmware is inside or not, you could upgrade the new firmware easily.

How to flash the firmware of Lite FC

DO NOT press and hold the button before inserting the battery. It will erase the firmware and need to re-flash the firmware according to the manual above.

Know More About V2

The Lite brushed FC V2 is available.

  • Integrate 25mW VTX, support change VTX channel brand via control.
  • Add LiteOSD information and OSD Menu.
  • Support firmware upgrade in DFU mode via USB port.
  • Integrate an altitude sensor ( altitude hold function is NOT available now).
  • 2 RGB LEDs

Since we released the world's first whoop FC with Silverware firmware in 2017, this board has become so popular among FPV pilots. Now we have upgraded to the V2 version with a ton of improvement. Also, the antenna is soldered in default.

Do you want to use your hobby radio transmitter (like Frsky QX7 / X9D etc) to control this drone in Bayang protocol? Want a long range control above 300m? High recommend this newest Bayang Lite RF module. Know more about this LiteModule here.

Key Features

  • The world's first FC board is compatible with Silverware firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.
  • Support level mode and acro mode. Also, it has the ability to change settings for custom builds or to adapt to personal preferences by stick gestures.
  • Designed to work with current whoop drone or Blade Inductrix frames
  • Built-in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module
  • The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.

 

Specifications

  • CPU: STM32F042
  • Six-Axis: MPU6050
  • ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
  • Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
  • Firmware version: Silverware firmware
  • Receiver: Bayang protocol
  • Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
  • Weight: 2.5g 

Silverware & LiteOSD

Silverware is firmware for some micro quadcopters, which support level mode and acro mode. So you could use this on whoop FPV racing. Also, it has the ability to change settings for custom builds or to adapt to personal preferences. 

LiteOSD is also integrated into the V2 board. So that you could set up many configurations according to your own preference easily. The method of entering the OSD Menu on Lite Brushed FC is the same as Betaflight. Make sure the drone is disarmed when entering OSD Menu on Lite 1S Brushless FC.



-Use Mode 2 (American Mode) as an example-
Note: The left throttle stick should be at the middle position and then pull left.
Note: AETR is the default channel mapping of Lite FC. If you can not enter the OSD menu, it might cause by unmatched channel mapping.

If you use a toy transmitter like LiteRadio 1, and also active the TOY_TX option in the OSD menu. You could enter the OSD menu when the throttle stick in the lowest position.

Supported Radio Transmitter

Currently, the built-in receiver is compatible with the Bayang protocol. Here is a listing of radio transmitters that could be compatible with this FC board.

If not sure whether your radio transmitter could support this FC board, please email us ( info@betafpv.com) for help.

For example, if you have a Frsky Tanaris QX7 / X9D radio transmitter and want to try this FC board, just plug in a BETAFPV LiteModule RF and done.

Some pilots would complain that it is definitely not a long range FC. It loses signal with my transmitter far too often and for what appears to be no reason. This issue is often caused by the location of the antenna. You should keep the antenna away from the FC board to get a stronger signal. For example, run the signal upwards. Thanks for Harley Feinberg's advice.

    Package

    • 1 * BETAFPV Lite Brushed Flight Controller V2.0 with Antenna
    • 4 * M1.2x4mm screws (Fit for stock Inductrix frame)
    • 4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
    • 4 * Anti-vibration rubber dampers

    __________________________________________________________________

    The description below are all for the Lite Brushed V1 (black color) board.

     

    By default in the V1 board, Silverware use stick sequences, which are also called gestures, to change modes, tune PIDs, calibrate accelerometer or save settings.

    For example, with the Frsky QX7 radio transmitter, change the FC's mode between level and acro. Just move the right stick as shown below.

    BETAFPV Lite Brushed Flight Controller

    For all the gestures in Silverware, please Go to Basic User Manual in support Freshdesk.

    This V1 board has 2 LEDs to indicate the status, including red LED ( at the front) and blue LED ( at the rear). 

    LED

    Status

    Description

    Both

    Flashing slowly at the same time

    Binding status

    Both

    Solid

    Connected

    Both

    Flashing quickly and then be solid

    Mode changed

      Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

      For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

      In almost all cases, we will work with you to debug your issue firstly. 

      Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

      NOTE: The refund amount is limited to the purchase price of the item.

      Directly Send Ticket: Create a new ticket

      *We do not accept ALL kinds of returns.

      *All sales are final.

      1.Shipping Time and Rules

      1.1 Estimated Shipping Time

      Expedited Shipping: 3-7 working days

      Standard Shipping (Registered Mail): 12-30 working days

      Please note:

      • There are estimated delivery time only, so BETAFPV can not guarantee an exact delivery time.
      • The estimated delivery time may be longer if any battery is included in your order.
      • If an item is out of stock, typically it takes 1-2 or more weeks to ship.
      • Incorrect information that objects to the below 1.5 Address Information Requirement may result in unsuccessful delivery and delays in receiving your package.

      1.2 Track Package

      After the order is shipped, you will receive a notification email containing the tracking number (you need to register BETAFPV website when placing the order).

      Or log in to your BETAFPV account and look at your order history which will show if it was shipped and provide a tracking link, if available, given your selected shipping methods. If your order status shows shipped but you do not see tracking that means your order is packaged and will be shipped shortly. If your status is processing it means that we have received your order and will be shipping as soon as possible.

      You can also enter the tracking number to check your package shipment status below. Please contact BETAFPV customer support for help if you are not able to track it.

      1.3 Batteries Shipping

      Some countries or remote regions are forbidden to ship stand-alone batteries due to restricted Customs rules.

      We will notify you if we are unable to ship batteries to your location. For expedited shipping like DHL, stand-alone batteries are prohibited to be shipped. Devices packed with less than or equal to two batteries like drones are available to be shipped. Devices in which Batteries contained like transmitters or goggles are accepted to be shipped without limits.

      Battery Type Definitions

      • Stand-alone: Package ONLY contains batteries or cells; NO equipment
      • Packed with: Package contains equipment + cells or batteries that are NOT installed in the equipment. For example, BNF drones with batteries or RTF drone kits.
      • Contained in: Package has lithium batteries contained in equipment (properly installed in the equipment they are intended to operate). For example, radio transmitter or goggles.

      1.4 List of Countries or Region That Prohibit From Importing Drones or Batteries

      Choosing standard shipping will be restricted.

      Asia: India, Indonesia, Malaysia, Vietnam, Philippines, Pakistan, Oman

      Africa: South Africa

      Region (Prohibit batteries): Hawaii, Puerto Rico, APO/FPO

      Note: It will be available for drones shipment if you would like to choose expedited shipping like DHL.

      1.5 Address Information Requirement

      For orders from below countries or regions below, address information has specially required. Please carefully read the following information. Incorrect information may result in unsuccessful delivery and delays in receiving your package.

      Special Regions: Orders with military or government addresses in Russia and Ukraine cannot be shipped. We reserve right to cancel the order and provide a full refund.

      Ukraine: Due to logistical restrictions, we are currently unable to ship any drones including any FPV Kits to Ukraine while batteries, frames, and other accessories can still be shipped.

      If you wish to purchase drones or kits, we apologize for the inconvenience and recommend either waiting for updates on shipping or removing the drones or kits in your order, or you could also considering purchasing from our authorized agent in Ukraine (https://rc-store.com.ua)

      United States: We are unable to ship to Armed Forces Europe (APO/FPO/DPO) addresses in the United States. Please provide an alternative address for delivery.

      Germany: Please ensure that the street address and house number information is provided in full. Omissions are not allowed.

      Japan: Please provide the full street address and house number information. Abbreviations with only numbers are not permitted.

      Australia: Please provide the correct postal code that matches the city, and ensure that the city name is written correctly without any omissions or abbreviations. Search postcodes for all suburbs and locations around Australia here. (https://auspost.com.au/postcode)

      Hong Kong or Macao: Please fill address and name in Chinese (traditional).

      Taiwan: Please fill address and name in Chinese (traditional), and provide personal ID number due to Customs requirement.

      South Korea: Please provide personal clearance code. You can apply for it from the below link if you do not have one. https://unipass.customs.go.kr/csp/index.do

      Brazil: Please provide your tax number (CPF) in your address.

      Chile: Please provide your individual tax number in your address.

      India: Please provide your Adhaar Card/Pan Card/KYC number in your address. Provide tax number if you place order as company.

      PO Boxes/APO/FPO Addresses: Shipments to PO Boxes, APO, FPO may be declined.

      1.6 BETAFPV Assume No Responsibility For Delayed Or Rejected Orders Due To The Following Reasons

      • Shipping time might be delayed for 3-7 days for transportation to remote regions. It might be 7 days longer if ships to islands area like Hawaii, Puerto Rico, Canary Islands etc.
      • Delay or delivery failure because of the consignee’s actions. These actions include, but are not limited to: changing the address after shipment, entering an unknown address or wrong address, entering incorrect contact information, and refusing to receive, etc.
      • Delay due to force majeure. “Force majeure” means an unforeseen, inevitable, or insurmountable objective situation and other objective conditions that cause delayed shipping, including, but not limited to: national or regional air or ground transportation system controls or interruptions (e.g., weather reasons), communication system interference or malfunction, government actions, postal administration policy changes, wars, earthquakes, typhoons, floods, fires, heavy rain, heavy fog, and other similar events.
      • Mail and packages cannot be delivered to the consignee’s address during weekends, national holidays, and festivals.
      • The consignee address is a school, hotel, unit, or residential community where the courier has no access. Please provide a permanent street address.

      *Please confirm your address before payment. If you enter the wrong address, please contact BETAFPV customer support in a timely manner.

      2.Shipping Method and Fee

      2.1 Standard Shipping

      We offer free standard shipping on orders of $99.99 or more. If your order does not qualify for free shipping, the shipping fee will be charged $5 on orders of $20 - $99.98; charged $10 on orders of less than $20. (Shipping fee will be different when delivering to remote countries/regions.)

      Products with big volume are excluded from free shipping rule due to dimensional weight calculated by shipping company.

      The product collections list is as follows:

      2.2 Expedited Shipping

      We offer expedited shipping service worldwide including islands area. The shipping fee will be shown on the check-out page once the expedited shipping method is chosen.

      Note: Purchasers are responsible for customs duties, taxes, customs clearance and other costs incurred when choosing expedited shipping.

      2.3 Additional Shipping Fee

      There are certain situations where you may be required to pay extra shipping fees.

      Expedited Shipping with Batteries: When choosing expedited shipping and placing an order that includes more than 2 batteries, which unfollows the 1.3 Batteries Shipping policy, an extra shipping fee will be applied to cover the separate shipping of the batteries.

      Reshipping Costs: Packages returned due to incorrect customer-provided addresses or the customs clearance cannot be completed due to customer-related issues, need to be reshipped will be subject to an additional shipping charge.

      3.FAQ

      3.1 How long until my order ships?

      All orders will be processed within 1-2 working days after your payment.

      If we are experiencing a high volume of orders or some products on back order, shipments may be delayed by a few days.

      If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

      3.2 After I place an order, how do I change my order before shipment?

      The nation cannot be changed once an order has been placed. If you need to change these details, please cancel the order and purchase again. Please contact BETAFPV customer support in 24 hours after placing the order if you need to change order product information or address.

      3.3 How do I cancel after I have placed the order, but it has not shipped?

      You can contact BETAFPV customer support for canceling if your order has not been shipped. If your order has been shipped less than 24 hours, please contact the customer service to help. We will try to hold your order from the shipping company.

      It is impossible to cancel if your order has been shipped over 24 hours.

      3.4 Under what circumstances will BETAFPV cancel an order unilaterally?

      Product(s) unavailable currently, BETAFPV tries to contact customers and does not get a reply in 7 days.

      High-Risk Order(s) identified by Credit Card bank or Paypal. To ensure your card safety, we will cancel your order.

      No Shipping Methods. If we are not able to ship to your location, Your order will be canceled.

      *The right of final interpretation of the shipping policy resides with BETAFPV

      *Policy information updated Feb 2024

      Other Pilots also purchased