Beta85X Whoop Quad for Naked Camera
Please note that the naked camera and the battery are not including. Click the link here to get the Beta85X FPV.
Bullet Point
- Beta85X comes with a BEC board, which specially designed for GoPro HERO6. Integrated GoPro stock buttons and LED.
- Install customized EOS2 V2 camera and A01 VTX,you can enjoy the real-time FPV feds and low RF interference on flight.
- Pad is available for pilot to control the GoPro recording via the radio transmitter.
- With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.
- Equipped with an adjustable camera mount of 0-50° for FPV film shooting. This will be the best choice for building the smallest cinewhoop drone that can carry a naked GoPro HERO6.
Specification
- Item: Beta85X for Naked Camera
- Weight: 67.77g (without GoPro HERO or battery)
- F4 AIO Brushless FC 12A V2 (BLHeli_S)
- Frame: Beta85X Frame V2
- Motors: 1105 5000KV Brushless motor
- Props: 2" 4-Blades Props
- Receiver Option: Frsky XM+ / TBS Crossfire
- Camera: Betafpv EOS V2 Camera
- Recommended battery: 450mAh 4s 75C battery (Not including)
85X Cinewhoop with GoPro
In recent months, more and more pilots are interested in the super small, lightweight and powerful cinewhoop. Pilots like Richárd Papp and Tommy Tibajia started their cinewhoop project. Based on the stable and insane power system of Beta85X, Tommy built his Umma85 and keep sharing all his ideas in the group. If you wanna know more about cinewhoop, feel free to join us on Facebook.
>> NAKED Cinewhoop Community
For providing a great combo for FPV community, we design a BEC board which is for the naked GoPro HERO6 perfectly. With the carbon fiber case and pluggable connector, it is easier to plug in and out. Meanwhile, we designed the adjustable camera mount of 0-50°, it can be used for the different flying modes of insane flying or slowing flying.
The idea of Naked Camera
Based on the discussion of the cinewhoop, we designed a BEC board and a fitting case for Naked GoPro HERO6/7 to make it as a whole GoPro Lite camera. With a pluggable connector and a lightweight of 29g, easier to install on your cinewhoop for FPV filming.
So what is the special of the BEC board? It is integrated with the 5V@2A BEC, the stock GoPro buttons, LED and remote recording, solving the problem of the unstable power supply and redundant FPC connect way. The current BEC board fits for GoPro HERO6 and GoPro HERO7 Black.
How to Setup Remote Record
Pilot could use the switch on radio transmitter to start/stop record. Some more configuration needed.
For example, if you use F4 FC V2.0 in the drone, like the 95X whoop drone, the connection diagram is shown below. The yellow cable (FC B12 pin pad) is just for the remote record.
We use the Pinio function in Betaflight to control record. First, setup the Pinio function of the B12 pin in the FC board.
resource FLASH_CS 1 NONE
resource PINIO 1 B12
set pinio_box = 40,255,255,255
save
Next, map one of the switch channels in your radio transmitter to this Pinio (aka USER1). As shown below, we map the AUX4 channel in the radio transmitter to USER1 Pinio. The cursor in the orange zone means button released and white zone means pressed. So keep the cursor in the orange zone in default.
Third, check if the Pinio function works. Change the switch and make the cursor move from the orange zone to the white zone, and finally back to the orange zone. Now you could check the LED status to know if the record starts. Use the same process to stop recording.
If you use the 12A F4 AIO FC board, like the 85X whoop drone, you will use the LED_STRIP pin (aka A08 pin pad) for the Pinio function.
resource LED_STRIP 1 NONE
resource PINIO 1 A08
set pinio_box = 40,255,255,255
save
Know more about the Betaflight Pinio function.
Parts of Naked Camera Series
We know some of the pilots might have a question about how to get the case for the naked camera or some might wanna grab the Naked Camera directly. Here we provide some more choices for your better installation.
- Beta95X for Naked Camera
- Beta85X for Naked Camera
- BEC Board for Naked Camera
- Case for Naked Camera
- Customized Naked Camera
How to Disassemble GoPro HERO6/8 Black
Special thanks to JONAH BLAESER who provided the method of disassembling GoPro HERO6/8 Black. If you are interested, please check the link to know the specific steps to make your own naked GoPro.
GoPro HERO6 Black Disassembly Guide
We also provided the method of disassembling GoPro HERO8 Black. If you are interested, please check the link.
GoPro HERO8 Black Disassembly Guide
Note: Do this at your own risk. You will lose your GoPro’s warranty and you may end up bricking the camera if something goes wrong. This guide is not authorized by GoPro and your camera is not guaranteed to work afterward. BETAFPV will not be held responsible for this action.
FAQ
- How to assemble the case with the GoPro camera
- STL File for Customized Naked Camera
- CLI Dump of Beta85X (Click here to find the details)
Package
- 1 * Beta85X for Naked Camera
- 1 * BEC Board for Naked Camera
- 1 * Case for Naked Camera
- 1 * GH1.25 Power Cable (80mm 30AWG)
- 1 * Pack of Screws
*Please note that the Naked camera and the battery are not including.
Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.
For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.
In almost all cases, we will work with you to debug your issue firstly.
Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.
NOTE: The refund amount is limited to the purchase price of the item.
Directly Send Ticket: Create a new ticket
*We do not accept ALL kinds of returns.
*All sales are final.
1.Shipping Time and Rules
1.1 Estimated Shipping Time
Expedited Shipping: 3-7 working days
Standard Shipping (Registered Mail): 12-30 working days
Please note:
- There are estimated delivery time only, so BETAFPV can not guarantee an exact delivery time.
- The estimated delivery time may be longer if any battery is included in your order.
- If an item is out of stock, typically it takes 1-2 or more weeks to ship.
- Incorrect information that objects to the below 1.5 Address Information Requirement may result in unsuccessful delivery and delays in receiving your package.
1.2 Track Package
After the order is shipped, you will receive a notification email containing the tracking number (you need to register BETAFPV website when placing the order).
Or log in to your BETAFPV account and look at your order history which will show if it was shipped and provide a tracking link, if available, given your selected shipping methods. If your order status shows shipped but you do not see tracking that means your order is packaged and will be shipped shortly. If your status is processing it means that we have received your order and will be shipping as soon as possible.
You can also enter the tracking number to check your package shipment status below. Please contact BETAFPV customer support for help if you are not able to track it.
1.3 Batteries Shipping
Some countries or remote regions are forbidden to ship stand-alone batteries due to restricted Customs rules.
We will notify you if we are unable to ship batteries to your location. For expedited shipping like DHL, stand-alone batteries are prohibited to be shipped.Devices packed with less than or equal to two batteries like drones are available to be shipped. Devices in which Batteries contained like transmitters or goggles are accepted to be shipped without limits.
Battery Type Definitions
- Stand-alone: Package ONLY contains batteries or cells; NO equipment
- Packed with: Package contains equipment + cells or batteries that are NOT installed in the equipment. For example, BNF drones with batteries or RTF drone kits.
- Contained in: Package has lithium batteries contained in equipment (properly installed in the equipment they are intended to operate). For example, radio transmitter or goggles.
1.4 List of Countries or Region That Prohibit From Importing Drones or Batteries
Choosing standard shipping will be restricted.
Asia: India, Indonesia, Malaysia, Vietnam, Philippines, Pakistan, Oman
Africa: South Africa
Region(Prohibit batteries): Hawaii, Puerto Rico, APO/FPO
Note: It will be available for drones shipment if you would like to choose expedited shipping like DHL.
1.5 Address Information Requirement
For orders from below countries or regions below, address information has specially required. Please carefully read the following information. Incorrect information may result in unsuccessful delivery and delays in receiving your package.
Special Regions: Orders with military or government addresses in Russia and Ukraine cannot be shipped. We reserve right to cancel the order and provide a full refund.
Ukraine: Due to logistical restrictions, we are currently unable to ship any drones including any FPV Kits to Ukraine while batteries, frames, and other accessories can still be shipped.
If you wish to purchase drones or kits, we apologize for the inconvenience and recommend either waiting for updates on shipping or removing the drones or kits in your order, or you could also considering purchasing from our authorized agent in Ukraine (https://rc-store.com.ua)
Germany: Please ensure that the street address and house number information is provided in full. Omissions are not allowed.
Japan: Please provide the full street address and house number information. Abbreviations with only numbers are not permitted.
Australia: Please provide the correct postal code that matches the city, and ensure that the city name is written correctly without any omissions or abbreviations. Search postcodes for all suburbs and locations around Australia here. (https://auspost.com.au/postcode)
Hong Kong or Macao: Please fill address and name in Chinese (traditional).
Taiwan: Please fill address and name in Chinese (traditional), and provide personal ID number due to Customs requirement.
South Korea: Please provide personal clearance code. You can apply for it from the below link if you do not have one. https://unipass.customs.go.kr/csp/index.do
Brazil: Please provide your tax number (CPF) in your address.
Chile: Please provide your individual tax number in your address.
India: Please provide your Adhaar Card/Pan Card/KYC number in your address. Provide tax number if you place order as company.
PO Boxes/APO/FPO Addresses: Shipments to PO Boxes, APO, FPO may be declined.
1.6 BETAFPV Assume No Responsibility For Delayed Or Rejected Orders Due To The Following Reasons
- Shipping time might be delayed for 3-7 days for transportation to remote regions. It might be 7 days longer if ships to islands area like Hawaii, Puerto Rico, Canary Islands etc.
- Delay or delivery failure because of the consignee’s actions. These actions include, but are not limited to: changing the address after shipment, entering an unknown address or wrong address, entering incorrect contact information, and refusing to receive, etc.
- Delay due to force majeure. “Force majeure” means an unforeseen, inevitable, or insurmountable objective situation and other objective conditions that cause delayed shipping, including, but not limited to: national or regional air or ground transportation system controls or interruptions (e.g., weather reasons), communication system interference or malfunction, government actions, postal administration policy changes, wars, earthquakes, typhoons, floods, fires, heavy rain, heavy fog, and other similar events.
- Mail and packages cannot be delivered to the consignee’s address during weekends, national holidays, and festivals.
- The consignee address is a school, hotel, unit, or residential community where the courier has no access. Please provide a permanent street address.
*Please confirm your address before payment. If you enter the wrong address, please contact BETAFPV customer support in a timely manner.
2.Shipping Method and Fee
2.1 Standard Shipping
We offer free standard shipping on orders of $99.99 or more. If your order does not qualify for free shipping, the shipping fee will be charged $5 on orders of $20 - $99.98; charged $10 on orders of less than $20. (Shipping fee will be different when delivering to remote countries/regions.)
Products with big volume are excluded from free shipping rule due to dimensional weight calculated by shipping company.
The product collections list is as follows:
- FPV Goggles
- BETAFPV Gates & Flags
- RTF FPV Whoop Kits
- LiteRadio Series radio transmitter
- Radio Transmitter & Drone Storage Cases
2.2 Expedited Shipping
We offer expedited shipping service worldwide including islands area. The shipping fee will be shown on the check-out page once the expedited shipping method is chosen.
Note: Purchasers are responsible for customs duties, taxes, customs clearance and other costs incurred when choosing expedited shipping.
2.3 Additional Shipping Fee
There are certain situations where you may be required to pay extra shipping fees.
Expedited Shipping with Batteries: When choosing expedited shipping and placing an order that includes more than 2 batteries, which unfollows the 1.3 Batteries Shipping policy, an extra shipping fee will be applied to cover the separate shipping of the batteries.
Reshipping Costs: Packages returned due to incorrect customer-provided addresses or the customs clearance cannot be completed due to customer-related issues, need to be reshipped will be subject to an additional shipping charge.
3.FAQ
3.1 How long until my order ships?
All orders will be processed within 1-2 working days after your payment.
If we are experiencing a high volume of orders or some products on back order, shipments may be delayed by a few days.
If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.
3.2 After I place an order, how do I change my order before shipment?
The nation cannot be changed once an order has been placed. If you need to change these details, please cancel the order and purchase again. Please contact BETAFPV customer support in 24 hours after placing the order if you need to change order product information or address.
3.3 How do I cancel after I have placed the order, but it has not shipped?
You can contact BETAFPV customer support for canceling if your order has not been shipped. If your order has been shipped less than 24 hours, please contact the customer service to help. We will try to hold your order from the shipping company.
It is impossible to cancel if your order has been shipped over 24 hours.
3.4 Under what circumstances will BETAFPV cancel an order unilaterally?
Product(s) unavailable currently, BETAFPV tries to contact customers and does not get a reply in 7 days.
High-Risk Order(s) identified by Credit Card bank or Paypal. To ensure your card safety, we will cancel your order.
No Shipping Methods. If we are not able to ship to your location, Your order will be canceled.
*The right of final interpretation of the shipping policy resides with BETAFPV
*Policy information updated Feb 2024