BETAFPV Lite Brushed Flight Controller V3
BETAFPV Lite Brushed Flight Controller V3
BETAFPV Lite Brushed Flight Controller V3
BETAFPV Lite Brushed Flight Controller V3
BETAFPV Lite Brushed Flight Controller V3
BETAFPV Lite Brushed Flight Controller V3

BETAFPV Lite Brushed Flight Controller V3

Regular price $19.99 USD Save $0.00 USD
22 in stock

Since we released the world's first whoop FC with Silverware firmware in 2017, this board become so popular among FPV pilots. Now we have upgraded to the V3 version with a ton of improvement. 

Know More About V3

The Lite brushed FC V3 is available with a sereis of improvement based on V2 version.

  • Built-in SPI Frsky receiver with D8 protocol.
  • PC Configurator is available for FC tuning and firmware flashing.
  • Integrate 25mW VTX, support change VTX channel brand via remote control.
  • Add LiteOSD information and OSD Menu.

User Manual for  Lite Brushed FC V3 board

Key Features

  • The V3 board comes pre-flashed with LiteSilver firmware. This must be the most simple and affordable method to try whoop FPV racing hobby.
  • Pilot could tune the FC board via the PC Configurator released with the V3 board at the same time. 
  • Built in Frsky D8 protocol native receiver, compatible with almost radio transmitter in the market. No need additional external Bayang TX module as V2 board.
  • Pre-soldered 55mm power cable pigtail with BT2.0 connector. So that pilot could try all features of this popular connector without any modification.

 

Specifications

  • CPU: MM32F103KBU6
  • Six-Axis: MPU6000
  • ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
  • Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
  • Firmware version: LiteSilver V3 firmware
  • Receiver: Built-in SPI Frsky with D8 protocol
  • Power Cable: 55mm, with BT2.0 connector
  • Port: External USB Type-C
  • Weight: 3.2g 

LiteSilver Firmware

LiteSiver is the next generation firmware developed by BETAFPV for whoop FPV drones. The idea of most features in this firmware is from the popular Silverware firmware. Comes with the V3 board, the PC configutator is also available. It has the ability to change settings for custom builds, or to adapt to personal preferences. 

LiteOSD OSD Menu

We developed the smallest and most efficient OSD solution (named LiteOSD) for LiteSilver FC board. LiteOSD is also integrated in the V3 board. So that you could setup many configrations according to your own preference easily with remote control. The method of entering OSD Menu on Lite Brushed FC is same as Betaflight. 


-Use Mode 2 (American Mode) as example-
Note: The left throttle stick should be at the middle position and then pull left.
Note: AETR is the default channel mapping of Lite FC. If you can not enter the OSD menu, it might cause by unmatched channel mapping.

    Package

    • 1 * BETAFPV Lite Brushed Flight Controller V3
    • 1 * USB Type-C adapter
    • 4 * M1.2x4mm screws (Fit for stock Inductrix frame)
    • 4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
    • 4 * Anti-vibration ruber dampers

    Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

    For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

    In almost all cases, we will work with you to debug your issue firstly. 

    Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

    NOTE: The refund amount is limited to the purchase price of the item.

    Directly Send Ticket: Create a new ticket

    *We do not accept ALL kinds of returns.

    *All sales are final.

    Affected by Covid-19, there will be some delay in the delivery.

    Shipping Methods and Charges

    We are currently able to ship orders to most international addresses. But some countries are not available to ship batteries without purchasing of whoop drone (logistics company restrictions).
    Two shipping methods are provided for you now. 
    • Standard Shipping
    • Expedited Shipping (including DHL / FedEx / UPS. Can not ship batteries)
    For expedited shipping, you need to pay weight-based rates, which will be calculated automatically.
    For standard shipping, then the shipping fee depends on the value of your orders. If your order is more than 20USD and less than 99.99USD, the shipping fee is 5USD. And the standard shipping fee is 10USD if your order is less than 20USD.
    Free standard shipping is offered when your order is over USD$99.99.

    Note:

    - Some remote address will be charged remote shipping fees according to the quotation of the logistics company.
    - Some special products with big volume are not applied to this free shipping rule. The product list as follows:

    For the strict Customs Policy, countries below are not available for delivering batteries. Therefore, if you fail to purchase from our site, hope can you understand that. We'll open selling once there is a reliable logistics channel.
    -India (Both drones and batteries)
    -Kuwait

    Shipping Time: 

    All orders will be processed within 3-5 working days after your payment clearing.
    If we are experiencing a high volume of orders or some products are out of stock, shipments may be delayed in a few days.
    If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

    Estimated Shipping Time:

    • Expedited Shipping: 3-7 working days
    • Standard Shipping (Registered Mail):  12-30 working days
    Please note:
    * These are estimated delivery times only, BETAFPV can not guarantee an exact delivery time.
    * The estimated delivery time may be longer if any battery included in your order.
    * Affected by Covid-19, there may be some delay in the delivery. 
    * We accept no responsibilities and liabilities for delay in shipping time as this is beyond our control.
    * Any problem about shipping info of your order, please contact Customer Support.

    Battery Shpping Issues

    - We can't ship the battery to the following countries by now: Indonesia / Middle / East / Indonesia/ Philippines/ Vietnam/ India/ Mexico/ UAE/ Brunei/ Finland/ Chile / Brazil / Oman and other remote areas. If your place a order but we don't have a logistic chanel to ship, we will send an email to inform you cancel the order. 
    - For European customers, if your parcel includes only batteries, it will take a longer time for the parcel to arrive in your country. Click here to track your parcel. 
    - If you only order batteries without a drone, then it can't be shipped by expedited Shipping (including DHL / FedEx / UPS) because of the strict restriction of shipping.
    - If the number of batteries in your order exceeds the acceptable range of the logistics, we will ask you to cancel order or ship the batteries separately(extra shipping fee may be requried).

    More Info requried

    If  you are in Taiwan, South Korea or Brazil, there is some extra information that we need in your order because of your country's import policy. Please offer the fllowing information in your address, so we can ship your order in time.
    • Taiwan or Hongkong: please fill your address and name in Chinese.
    • South Korea: please provide your personal clearance code. If you do not have it, please apply it from this website:
      https://unipass.customs.go.kr/csp/index.do
    • Brazil: please provide your tax number (CPF) in your address.
    • Chile: please provide your individual tax number in your address.

    How To Track My Parcel

    We provide trackable shipping service to most of the package. Please click here to reach detail information.

    Wrong Address

    Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.

    We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.

    Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion. 

    Damaged box or incorrect item(s)

    If you receive damaged or incorrect item(s), contact Customer Support in 5 business days with receipt of your shipment to make the necessary corrections. 

     

    All duties and taxes are the responsibility of the customer. 

     

    Customer Reviews

    Based on 2 reviews
    0%
    (0)
    0%
    (0)
    100%
    (2)
    0%
    (0)
    0%
    (0)
    C
    Customer
    Source code and original hex file missing and needed

    Bought this FC throught Banggood and had to dig the internet to find the right version of PC Configurator. Your Github page does not have this FC source code. It is extremely important to have both the original hex file as well as the source code since it's based on OpenSource. If you could make them both available I'm sure a lot a people would find that pretty convenient. Thank you

    I
    Istvan Fedor
    Good fc with no support whatsoever

    Flies good and feels smooth as butter but.
    No manual, fw or configurator for the v3, only the v2.
    A sudden bump automatically disarms which is nice for a beginner but I'd really like to turn this feature off.
    The v2 configurator might work but it doesn't load the current settings or even the default settings so it's like a completely blind setup.
    To sum it all up. Good fc, no support.