ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module
ELRS Micro TX Module

ELRS Micro TX Module

Regular price $39.99 USD Save $-39.99 USD
-454 in stock

BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.

A ton of ExpressLRS items are available now!

The ELRS Micro TX Module Case and Fan are released now! Upgraded module case with 6.5*13.5mm USB port housing is compatible with most USB Type-C cables. Moreover, there are two colors in the new module case. You can make your own module easily.

Specification

  • Item: ELRS Micro TX Module
  • Input voltage: 5V~12V
  • XT30 port: 5V~12V, recommend 2S(8.4V) battery, DO NOT support 3S(12.6V) or above 
  • USB port: Type-C
2.4GHz 1W

2.4GHz 500mW

915/868 MHz 500mW

Packet refresh rate

50Hz, 150Hz, 250Hz, 500Hz

50Hz, 150Hz, 250Hz, 500Hz

25Hz, 50Hz, 100Hz, 200Hz

RF output power

25mW, 50mW, 250mW, 500mW, 1W

25mW, 50mW, 250mW, 500mW

100mW, 250mW, 500mW

Frequency bands

2.4GHz ISM

2.4GHz ISM

915MHz FCC 868MHz EU

Heat sink Included Not included
Not included
Backpack Function Support
Not support currently Not support currently

ELRS 2.4G 1W Version

The black version with maximum 1W RF output power is released now. Support all 5D button dimensions based on BETAFPV ELRS V2.0.0 firmware. A new backpack function is added, allowing wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying config.

Note: Please make sure the VRX also supports backpack function when using the module VRX-backpack function. Backpack function will be added to the 500mW version in the future.

Compared with 500mW versions, it not only builds in a cooling fan but also the heat sink is included, which enhances the performance of cooling. So this module can work properly in daily use and not need to worry about temperature. 

Note: About the temperature test, please read the article ELRS Micro Module Temperature.

1W Limited Edition

Apart from the classical case for the micro TX module, a limited edition will be released together. Both classical case and limited case versions have the same function. The 3D-printed case with new appearance design makes the module very cool when LED light flashing. Limited stock, first come first serve!

Diagram

BETAFPV Micro RF TX module is compatible with radio transmitter which has the micro module bay (AKA JR/SLIM module bay, e.g. Frsky Taranis X9D, TBS Mambo). Below is the diagram for the 500mW version module.

Below is the diagram for ELRS 2.4G 1W version. DIP switches will be added to 500mW versions in the future.

Note: Please assemble the antenna before power on. Otherwise, the PA chip in the Micro TX module will be damaged permanently. 

Note: Please DO NOT use 3S or above battery to power up the TX module via XT30 port. Otherwise, the power supply chip in the TX module will be damaged permanently.

Note: Please do not turn on all DIP switches at the same time. You can refer to the chart to know about DIP switches on/off based on different uses.

1-2 DIP switches
3-4 DIP switches 5-6-7 DIP switches
Update Firmware ON OFF OFF
Operating Mode OFF ON OFF
Update Backpack OFF OFF ON

About the Firmware

The ExpressLRS official project on Github does NOT support the OLED function for the moment. BETAFPV team will work with the ELRS team and make the official repository support the OLED and button function ASAP.

    BETAFPV Micro TX Module ELRS V2.0.0 firmware is published. The firmware does not include the Binding Phrase. So please make sure the receiver works on officially major release V2.0.0 protocol and no Binding Phrase set.

    • Support 5D buttons and the OLED menu with the official ELRS 2.0.0 release.
    • The color of the LED changes automatically according to the system status.
    • Other new and various features are fully synchronized with the official ELRS 2.0.0.
    • When entering OLED menus page with long pressing, the connection between RF TX module and receiver works normally. Please do not change the Pkt Rate, otherwise, you must re-power the receiver.

    https://github.com/BETAFPV/ExpressLRS

    User manual of How to Flash Firmware of ELRS RX/TX.

    You could all use the ELRS official firmware V2.0-RC2 now, but lost the function of OLED and Joystick. We will work with the ELRS dev team and make the ELRS official firmware support the full function of the Micro TX Module. For the milestone, OLED will be supported in the V2.1 officially.

    https://github.com/ExpressLRS/ExpressLRS

    How do I set a binding phrase on this Micro TX module when the ELRS official mainstream does not support OLED yet?

    First, download the source code of master-betafpv-oled-menu branch to local from Github.

    Second, open the ExpressLRS Configurator and load the upzip source code from local. Select the target device "BETAFPV 900/2400 TX Micro". Now, you could setup your own binding phrase and other options as normal.

    Third, build & flash.

    Know More About ExpressLRS

    ExpressLRS is an open-source RC link for RC applications. Everyone could find this project on Github or join the discussion in Facebook Group.

    ExpressLRS is based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. it aims to achieve the best possible link performance in both speeds, latency, and range. At 900 MHz a maximum of 200 Hz packet rate is supported. At 2.4 GHz a blistering 500Hz is currently supported with a custom OpenTX build. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.

    More and more vendors start to support the ExpressLRS radio protocol in different parts, like radio transmitter with ELRS in stock, drone with built-in ELRS receiver, ELRS TX module for JR bay, or Nano bay. BETAFPV team take part in this project and provide a series of ExpressLRS components.

    Backpack Function

    Some of the ExpressLRS TX modules include an additional ESP8285 chip, which lets us communicate wirelessly with other ESP8285 enabled devices using a protocol called espnow. We call this chip the "TX-Backpack". The aim of the TX-Backpack is to allow wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying config.

    https://github.com/ExpressLRS/Backpack/wiki

    Button and OLED

    The ELRS TX module could be configured via the OpenTX LUA script. With OLED and button, no-OpenTX radio controller that supports CRSF could use this ELRS Micro module easily. The following no-OpenTX radio controllers work well with this TX module. Futaba T16IZ, T16SZ and T18SZ (with update to 3.9e), Wsky ET16, Radiolink AT9S Pro.

    Note: All 5D button dimensions are available on BETAFPV ELRS V2.0.0 firmware. Please upgrade the firmware for new supports.

    Below is the basic operation of the button and OLED for V1.0.0 firmware.

    Long Press:

    In the lock screen page, long press to unlock and enter the menu page.

    In the menu page, long press to change the value of this row.

    Short Press:

    In the lock screen page, short press invalidly.

    In the menu page, short press to move to the next row.

    Note: When the RF TX module is entering menus page, the connection between RF TX module and receiver will be lost, the connection will recover after exiting menus page automatically; you must re-power the receiver if you have changed the Pkt Rate.

    Note: When the RF TX module enters WIFI Upgrade status, the button will be invalid. Please re-power the RF TX module after firmware update via WIFI.

    ELRS Micro TX Module

    Below is the basic operation of the button and OLED for BETAFPV ELRS V2.0.0 firmware.

    Long Press: Unlock and enter the menu page, or apply current settings in the menu page.
    Up/Down: Move to the last/next row.
    Left/Right: Change the value of this row.
    Short Press: Enable binding status or WiFi upgrade status.

    Note: You must re-power the receiver if you have changed the Pkt Rate.

    Note: When the RF TX module enters WIFI Upgrade status, the button will be invalid. Please re-power the RF TX module after firmware update via WIFI.

    Basic Configuration

    ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the radio transmitter and the TX module. So make sure your radio transmitter supports the CRSF serial protocol. We use the radio transmitter with the OpenTX system to show how to set up the CRSF protocol and LUA script. To set this up, in the OpenTX system, enter into model settings, and on the "MODEL SETUP" tab, turn off the "Internal RF". Next, enable "External RF" and select "CRSF" as the protocol.

    ExpressLRS use the OpenTX LUA script to control the TX module, like bind or setup. With the LUA script, pilots could check, and set up some configurations of the Nano RF TX module. For more details, please check the Support Page.

    • Save the ELRS.lua/ELRSV2.lua script files onto the radio transmitter's SD Card in the Scripts/Tools folder;
    • Long press the "SYS" button (for RadioMaster T16 or similar radios) or the "Menu" button (for Frsky Taranis X9D or similar radios) to access the Tools Menu where you can find ELRS/ELRSV2.lua script ready to run with only one click;
    • Below image shows the LUA script run successfully;

    ELRS.lua script

    ELRSV2.lua script

    Bind & Output Power

    The Micro RF TX module comes with officially major release V1.1.0 or V2.0.0 protocol and no Binding Phrase included. So please make sure the receiver works on officially major release V1.0.0~V1.1.0 or V2.0.0 protocol. And no Binding Phrase set. Micro RF TX module could enter binding status via ELRS.lua or ELRSV2.lua script, as described in "LUA Script" chapter. Besides, using the button and OLED, move to the BIND position and long-press the button. Short press the button if it is V2.0.0. Then the RF module will enter binding status.

    ELRS.lua script

    Note: The LED will NOT flash when entering binding status. The module will exit from binding status 5 seconds later auto. Short and consecutive press 3 times to bind.

    ELRSV2.lua script

    Note: The LED will NOT flash when entering binding status. The module will exit from binding status 5 seconds later automatically.

    Note: If you reflash firmware of the RF TX module with your own Binding Phrase, please make sure the receiver has the same Binding Phrase. The RF TX module and the receiver will bind automatically in this situation.

    Micro RF TX module could switch the output power via ELRS.lua or ELRSV2.lua script, as described in "LUA Script" chapter. Besides, using the button and OLED, move to the Output position. Switch the output power by long-pressing the button (ELRS.lua script). Pushing the button left or right (ELRSV2.lua script).

    ELRS.lua script

    Note: The RGB LED will NOT change according to the output power. When the output power is 250mW or above, the fan will spin automatically. The Micro RF TX module does NOT support 1W or 2W output. When switching to this value, the system will move to 500mW automatically.

    ELRSV2.lua script

    Note: The RGB LED will NOT change according to the output power. When the output power is threshold value(default 250mW) or above, the fan will spin automatically.

    FAQ

    BETAFPV ELRS Micro TX module user manual download.

    Package

    • 1 * BETAFPV ELRS Micro TX module
    • 1 * BETAFPV Moxon antenna
    • 1 * Micro TX module user manual
    • 1 * Spare USB data cable (Type-A to Type-C)

    The antenna in the package is not the same as shown below for 915MHz and 868MHz version.

    The USB port housing is 6.2*11mm and may not compatible with your own USB cables. So a spare USB data cable (Type-A to Type-C) is included in the package for all order since November 18, 2021.

    Besides, with an upgraded USB port housing up to 6.5*13.5mm, the new module case is compatible with most USB Type-C cables including yours. Click here to buy! At the same time, the ELRS Micro TX Module comes with an upgraded case for orders from now.

    For previous order, if you do not have a suitable USB cable for this Micro module, feel free to contact us. Email to support@betafpv.com. 

    Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

    For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

    In almost all cases, we will work with you to debug your issue firstly. 

    Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

    NOTE: The refund amount is limited to the purchase price of the item.

    Directly Send Ticket: Create a new ticket

    *We do not accept ALL kinds of returns.

    *All sales are final.

    Affected by Covid-19, there will be some delay in the delivery.

    Shipping Methods and Charges

    We are currently able to ship orders to most international addresses. But some countries are not available to ship batteries without purchasing of whoop drone (logistics company restrictions).
    Two shipping methods are provided for you now. 
    • Standard Shipping
    • Expedited Shipping (including DHL / FedEx / UPS. Can not ship batteries)
    For expedited shipping, you need to pay weight-based rates, which will be calculated automatically.
    For standard shipping, then the shipping fee depends on the value of your orders. If your order is more than 20USD and less than 99.99USD, the shipping fee is 5USD. And the standard shipping fee is 10USD if your order is less than 20USD.
    Free standard shipping is offered when your order is over USD$99.99.

    Note:

    - Some remote address will be charged remote shipping fees according to the quotation of the logistics company.
    - Some special products with big volume are not applied to this free shipping rule. The product list as follows:

    For the strict Customs Policy, countries below are not available for delivering batteries. Therefore, if you fail to purchase from our site, hope can you understand that. We'll open selling once there is a reliable logistics channel.
    -India (Both drones and batteries)
    -Kuwait

    Shipping Time: 

    All orders will be processed within 3-5 working days after your payment clearing.
    If we are experiencing a high volume of orders or some products are out of stock, shipments may be delayed in a few days.
    If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

    Estimated Shipping Time:

    • Expedited Shipping: 3-7 working days
    • Standard Shipping (Registered Mail):  12-30 working days
    Please note:
    * These are estimated delivery times only, BETAFPV can not guarantee an exact delivery time.
    * The estimated delivery time may be longer if any battery included in your order.
    * Affected by Covid-19, there may be some delay in the delivery. 
    * We accept no responsibilities and liabilities for delay in shipping time as this is beyond our control.
    * Any problem about shipping info of your order, please contact Customer Support.

    Battery Shpping Issues

    - We can't ship the battery to the following countries by now: Indonesia / Middle / East / Indonesia/ Philippines/ Vietnam/ India/ Mexico/ UAE/ Brunei/ Finland/ Chile / Brazil / Oman and other remote areas. If your place a order but we don't have a logistic chanel to ship, we will send an email to inform you cancel the order. 
    - For European customers, if your parcel includes only batteries, it will take a longer time for the parcel to arrive in your country. Click here to track your parcel. 
    - If you only order batteries without a drone, then it can't be shipped by expedited Shipping (including DHL / FedEx / UPS) because of the strict restriction of shipping.
    - If the number of batteries in your order exceeds the acceptable range of the logistics, we will ask you to cancel order or ship the batteries separately(extra shipping fee may be requried).

    More Info requried

    If  you are in Taiwan, South Korea or Brazil, there is some extra information that we need in your order because of your country's import policy. Please offer the fllowing information in your address, so we can ship your order in time.
    • Taiwan or Hongkong: please fill your address and name in Chinese.
    • South Korea: please provide your personal clearance code. If you do not have it, please apply it from this website:
      https://unipass.customs.go.kr/csp/index.do
    • Brazil: please provide your tax number (CPF) in your address.
    • Chile: please provide your individual tax number in your address.

    How To Track My Parcel

    We provide trackable shipping service to most of the package. Please click here to reach detail information.

    Wrong Address

    Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.

    We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.

    Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion. 

    Damaged box or incorrect item(s)

    If you receive damaged or incorrect item(s), contact Customer Support in 5 business days with receipt of your shipment to make the necessary corrections. 

     

    All duties and taxes are the responsibility of the customer. 

     

    Customer Reviews

    Based on 20 reviews
    65%
    (13)
    10%
    (2)
    15%
    (3)
    0%
    (0)
    10%
    (2)
    J
    Jipi Cad
    Jai des failsafe au 10 sec

    Bonjour ...
    comme jai dit plus haut j,ai commander un module Elrs pour pouvoir faire de l insertion dans le petit bois chez moi ... mais le premier test sur mon 5 pouces a voler 3 min est a tomber en NO Rx ...

    Jai installer les firmware , mise a jour ... avec les scripts Lua qui ont beaucoup de misere a loader dans une taranis x9d plus ...

    Malheureusement je suis au Quebec est c’est l’hiver ici donc je ne peux tester d avantage ... alors pour le moment je vais ME donner le bénéfice du doutes ...

    Ps .. J avait placer une commande avec le module 2.4 mhz ... mais je ne pourrait pas dire la cause d avoir recu un modele 900mhz ... parce que j avait deja un module Frsky R9 pour du long range

    Merci beaucoup a vous
    Je vous souhaite une bonne fin de journee :)

    P
    Patrick Lajoie

    It’s a very good product

    b
    brayden derijke`
    Love it

    So far has worked perfectly. Was a little hard to set up to radio but that was just user error and nothing wrong with the product. Great product Beta FPV

    G
    Gabrie Carvalho
    An alright expresslrs transmitter with dubious build quality

    It took close to a month to arrive. It fits my transmitter pretty well, but the fan is already dead before a month after I got it, and the way betafpv approached the firmware side of things isn't the best by forking the main repo

    P
    PK
    Great entry into ExpressLRS

    Easy to flash, set up and works great.