F4 1S Brushless Flight Controller V2.2
Sale price $39.99 USDThis is the lightest F4 1S brushless FC in the current market. Upgraded to V2.2, we have optimized the design of power supply for a stable flying experience. With BT2.0 connector, slim and sleek design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness.
Equips with BT2.0 connector, all 1S brushless drones will gain stronger powerful and perfect performance. Specially made for 1S brushless whoop with F411 chip. A great choice for building Beta65 Pro and Beta75 Pro.
If you own an initial PH2.0 connector FC but want to try the new BT2.0 connector, you could get the BT2.0 connectors FREE and re-solder it.
Know more about the BT2.0 connector.
Ultra-compact with 2.69g weight(No include power cable), this FC is ready and waiting to take residence within your 1S micro FPV aircraft of choice, which could save much weight for a faster fly experience.
Want to try Silverware firmware on your 1S brushless drone, please check the Lite 1S flight controller board.
SPECIFICATIONS OF FC
- CPU: STM32F411CEU6 ( 100MHZ )
- Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
- Size: 29mm x 29mm, fully compatible with the whoop frame in the current market, Beta65 Pro frame, Beta75 Pro frame, BWhoop B06 frame, and mounting pattern
- Firmware version: Frsky / Futaba: Betaflight MATEKF411RX (MK41R) , DSMX: Betaflight MATEKF411
- Compatible with Z02, A01, M01 VTX
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- Power Cable: 55mm, with BT2.0 connector
- Weight: 2.69g
SPECIFICATIONS OF ESC
- Power supply: 1S
- Current: 5A continuous and peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_L_5_REV16_6.HEX
- Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
RECOMMENDED PARTS LIST
- Battery: BT2.0 300mAh 1S Battery
- Frame: Beta65 Pro frame / Beta75 Pro frame
- Props: 31mm 4-Blades props (for Beta65 Pro frame) / 40mm 4-blades props (for Beta75 Pro frame)
- Motors: 0603 motors / 0703 motors / 0802 motors
DIAGRAM FOR F4 1S FC V2.1 (Frsky / Futaba RX)
DIAGRAM FOR F4 1S FC V2.0 (No RX)
DIAGRAM FOR F4 1S FC V2.0 (DSMX RX)
PACKAGE
- 1 * F4 1S brushless flight controller(BT2.0 Connector)
- 4 * M1.2x4mm screws
- 4 * M1.4x5mm screws
- 4 * Anti-vibration rubber dampers
Updated History:
Mar 10th,2020- Frsky FCC/ Frsky LBT/Futaba RX version has updated from V2.1 to V2.2, we optimized the design of power supply for a stable flying experience.
Nov 20, 2019- Adopted BT2.0 connector power cable instead of PH2.0. Check BT2.0 series accessories.
Oct 21, 2019- Frsky / Futaba RX version has updated from V2.0 to V2.1, which adopted 5V as battery voltage input instead of original VBAT. Others version comes with 5V at V2.0. So all of versions are suitable for ultra-lightweight only 3g M01 AIO Camera VTX.
Betaflight CLI Configuration
You can modify the flight controller configuration directly from the command line, using the bottom CLI page in Betaflight GUI.
Click here to reach out to CLI Configuration.
HOW TO CONNECT THE EXTERNAL RX TO F4 1S Brushless Flight Controller V2.0（No RX）
Here is the connection diagram with Frsky XM+ receiver.
Here is the connection diagram with FS-RX2A receiver.
Here is the connection diagram with Futaba-X-BOSS AC900 receiver.
Here is the connection diagram with TBS Crossfire receiver.
Here is the connection diagram with DSMX FullSpeed receiver.
STATUS LED（No RX）
There are 3 LEDs on board to indicate the status, including Mode LED (Blue), FC Status LED (Red) and FC Power LED (Green).
| LED | Status | Description |
| Mode LED (Blue) | Solid | Horizon Mode/ Angle Mode |
| Mode LED ( Blue ) | Extinguished | Acro Mode |
| Power LED (Green) | Solid | Power on |
| Status LED (Red) | Solid | Motor Armed |
STATUS LED (Frsky / Futaba RX)
There are 2 LEDs on board to indicate the status, including Receiver LED ( Green), FC Status LED ( Red ).
|
LED |
Status |
Description |
|
Receiver LED ( Green) |
Solid |
Connected or in bind mode |
|
Receiver LED ( Green) |
Flashing |
Not connected |
| Status LED ( Red ) | Solid | Motor Armed |
Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.
For merchandise was confirmed as genuinely defective（Product Design problem & Quality issues）, we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.
In almost all cases, we will work with you to debug your issue firstly.
Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.
NOTE: The refund amount is limited to the purchase price of the item.
Directly Send Ticket: Create a new ticket
*We do not accept ALL kinds of returns.
*All sales are final.
Shipping Methods and Charges
- Standard Shipping
- Expedited Shipping (DHL)
How To Track My Parcel
We provide trackable shipping service to most of the package. Please click here to reach detail information.
Wrong Address
Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.
We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.
Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion.
Damaged Box or Incorrect Item(s)
If you receive damaged or incorrect item(s), contact Customer Support no later than 5 business days of receipt of your shipment to make the necessary corrections.
* All duties and taxes are the responsibility of the customer.
* Betafpv.com accepts no responsibilities and liabilities for delay in shipping time as this is beyond our control.
